User manual KONICA MINOLTA 7155

[. . . ] 1-6 Precautions for Routine Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Machine Information 2 Section 2: Machine Information Machine Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 External Machine Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Internal Machine Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Two copiers should have the same optional configuration except for the option tray (LT-401/LT-411). Two copiers should be turned on and ready for copying. The copier with the TANDEM key highlighted on the Output Mode popup menu will be the primary (master) copier, turning both copiers into the tandem mode. Select the copying conditions, scan originals, and press [START] on the primary copier to operate both copiers in tandem to complete a job. Print quantity must be set for [2] or more copies to activate the tandem mode. When the print quantity entered is an odd number, the primary copier will copy and output one sheet/set more than the secondary copier to accommodate the job. Auto low power/Auto shut-off may function while tandem mode is selected. · If the tandem mode is selected while the secondary copier is in Auto low power mode, the power saving mode will be released automatically. · The tandem mode will not be selected when the secondary copier is turned off by Auto shut-off. Release the Auto shut-off mode by pressing [POWER SAVER ON/OFF]. · If Auto low power is activated on the secondary copier during the tandem job setting, the power saving mode will be released automatically when printing job starts. Take the appropriate troubleshooting measures to be ready for copying. · Tandem printing job cannot be started if 5 reserve jobs (not in tandem mode) are entered on the secondary copier. Wait until the reserve jobs are completed on the secondary copier. · Selected tandem mode will be released automatically when the primary copier activates Auto low power/Auto shut-off. Press [POWER SAVER ON/OFF] to release Auto shut-off if required, then select the tandem mode again to restart the procedure. Three-Fold Cover Sheet Feeding Using Finisher Manually Tandem Mode Advanced Information 7 4. Select the desired copying conditions on the primary copier. FOR DETAILS Ordinary copying operation is still available on the secondary copier during the tandem mode setting. 5. Enter print quantity on the primary copier, using the keypad. When a print quantity amount of 100 is entered, the primary and secondary copiers will each copy and output 50 sheets. FOR DETAILS · Print quantity must be set for [2] or more copies to activate the tandem mode. · When the print quantity entered is an odd number, the primary copier will copy and output one sheet/set more than the secondary copier to accommodate the job. 7-25 7155e07v1. fm 26 Using Two Copiers in Tandem (continued) 6. Position original(s) FACE UP in the document feeder or FACE DOWN on the platen glass of the primary copier. HINT See p. 3-5 for details on positioning originals. 7. Press [START] on the control panel of the primary copier. The Sub icon ( ) will display on the Basic Screen of the secondary copier to indicate that the two copiers will start working in tandem. The tandem mode will be released automatically when the tandem mode copying is completed, and the Master and Sub icons on each Basic Screen will disappear. FOR DETAILS: Entering reserve job during Tandem mode copying If scanning of the next reserved job is performed during the tandem mode copying, that job will also be performed in the tandem mode. Up to 5 jobs including the present job can be reserved. Interrupt mode during Tandem mode copying Interrupt copying is available only on the copier with [INTERRUPT] pressed. The tandem mode copying on the copier in interrupt mode will be suspended until the interrupt copying is completed. [. . . ] The following three address types can be registered. · E-mail · HDD (box No. ) · FTP (FTP server address) NOTE: The [19] Scan Transmission Setting key will function only when IP511 Printer Controller is installed on the machine. Key Operator Mode Screen Scan Transmission Setting Screen Change E-Mail Address Screen Change Box No. Screen Change FTP Address Screen Procedure 1 Touch [19] Scan transmission setting on the Key Operator Mode Screen to display the Scan Transmission Setting Screen. [. . . ]