User manual KONICA MINOLTA 7920 EV2

[. . . ] 7915/ 7920 Energy Star® As an ENERGY STAR® Partner, we have determined that this machine meets the ENERGY STAR® Guidelines for energy efficiency. *The ENERGY STAR® Guidelines are not met if printer controller Fiery Z4 is installed. What is an ENERGY STAR® Product?An ENERGY STAR® product has a special feature that allows it to automatically switch to a "low-power mode" after a period of inactivity. An ENERGY STAR® product uses energy more efficiently, saves you money on utility bills and helps protect the environment. Trademarks and Registered Trademarks Fiery and the Fiery logo are registered trademarks of Electronics for Imaging, Inc. Fiery X3e and Fiery Z4 are trademarks of Electronics for Imaging, Inc. [. . . ] (Refer to page 3-20 for more details. ) 3 Touch [Orig. Ö Copy screen appears. 4 Select the type of document that is to be copied and the desired type of copy. ? If the optional memory (MU-431) is not installed, the screen shown at the right appears. Select the type of document that is to be copied. If [Compress Mode] is touched, [Color] (image quality priority) is set as the default. If the memory is not installed, touch [Compress] to prevent errors. (Refer to page 10-45. ) Since copy quality will decrease when Compress Mode is changed, the setting should normally not be changed. 5 Specify any other necessary settings. 6 Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. 7-4 Konica 7915/7920 Advanced Operations To make settings for copying a book 7 1 Position the document(s) to be copied. (Refer to page 5-1 for more details. ) 2 Select the desired color mode. (Refer to page 3-20 for more details. ) 3 Touch [Orig. Ö Copy]. 4 Touch [Book]. The Book screen appears. Is the "Book" setting not available? ? If the "Frame Erase" or "Mirror Image" functions are selected, the "Book" setting cannot be selected. Cancel the "Frame Erase" and "Mirror Image" functions before selecting the "Book" setting. 5 Select the type of document that is to be copied and the desired type of copy. 6 To erase the area around the text (frame erase) or the binding of the book (centre erase) so that it does not appear in the copy, touch [Book Erase]. Is frame erasing and centre erasing unnecessary? ? If frame erasing and centre erasing are unnecessary, skip to step 12. Konica 7915/7920 7-5 7 7 On the left side of the screen, select the pattern of the area that you wish to be erased. Advanced Operations To erase an area all along the outer edge of the book, touch (frame erase). To erase an area just along the centre binding of the book, touch (centre erase). To erase an area both along the outer edge and along the centre binding of the book, touch (frame and centre erase). and to specify the width that is to be erased. 8 Touch The width of the frame that is erased can be set between 1 and 30 mm (in units of 1 mm). The default setting is "15". 9 Normally, the document size is automatically detected. However, when copying a document of a nonstandard size, touch [Original Size]. ?Is it unnecessary to specify the size of the document? If the size of the document is not to be specified, skip to step 12. 10 In the Original Size screen, touch [X] and [Y], and use the keypad to specify the desired size, and then touch [Enter]. The Book Erase screen reappears. 11 In the Book Erase screen, touch [Enter]. document ?size already been specified using a setting on another Even if the document size has already been specified using a setting on another screen, the size set here determines the document size setting. 12 In the Book screen, touch [Enter]. 13 Specify any other necessary settings. 7-6 Konica 7915/7920 Advanced Operations 7 14 Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. Konica 7915/7920 7-7 7 7. 2 Advanced Operations Finishing ("Sort" and "Group" settings) When copying or printing two or more copies of the document, the copies can be divided either by sets containing a copy of each page (sorted) or by pages (grouped). [. . . ] 3-11 S Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input" function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-34 Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28 Single- or double-sided documents and copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]