User manual KONICA MINOLTA BIZHUB PRO 1050 SCANNER UM 1-1-0

[. . . ] "IZHUB 02/ 3CANNER ___________________________________________________________________________ 5SER -ANUAL Table of Contents 1 Introduction 1. 1 1. 1. 1 1. 1. 2 1. 1. 3 1. 2 1. 3 1. 3. 1 1. 3. 2 1. 3. 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Exemption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 OpenSSL Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In the initial settings, the Select Destinations/Storage Locations screen (E-Mail) is displayed. For information on the initial settings of the SCAN tab, contact your administrator of the copier. 3 If you need to change the Port No. , press the [Port No. ] key. If unnecessary, go to the step 10. 4 Input a Port No. and press the [OK] key. ! Details The initial setting is 21. for an FTP server is configured in 5-digit numbers (1-65535). If you want to change the Port No. , consult with a network administrator. 6-20 bizhub PRO 1050 Scanner Using the Network Scanner Features 6 5 Press the [Manual Address] key. ! Details If you select a destination from the registry, refer to "When an FTP server is Already Registered" on page 6-17. The Manual Address screen appears. 6 Press the [Host Address] key to input a Host Address. ! Details Pressing the [Host Address] key displays the character input screen. For more information on how to input characters, refer to "How to Input Characters" on page 3-7. 7 Press the [File Path] key to input a File Path. ! Details Pressing the [File Path] key displays the character input screen. For more information on how to input characters, refer to "How to Input Characters" on page 3-7. bizhub PRO 1050 Scanner 6-21 6 8 Using the Network Scanner Features Press the [Login Name] key to input a Login Name. ! Details Pressing the [Login Name] key displays the character input screen. For more information on how to input characters, refer to "How to Input Characters" on page 3-7. Pressing the [Anonymous] key inputs "Anonymous" to the Login Name field. This key is available when you use the Anonymous FTP (where file sharing is done between unspecified number of users). 9 Press the [Password] key to input a Password. ! Details Pressing the [Password] key displays the character input screen. For more information on how to input characters, refer to "How to Input Characters" on page 3-7. "*"s are displayed according to the number of characters you input. 10 Press the [Scanner Screen] key. The Scanner Setting Basic screen appears. 6-22 bizhub PRO 1050 Scanner Using the Network Scanner Features 6 11 Configure the necessary items. ! Details For more information on the configurations on the Scanner Setting Basic screen, refer to "About the Scanner Setting Basic Screen" on page 7-3. 12 Set an original and press the [START] button. ! Details The original is scanned, and the scanned data are sent to an specified destination. The Reserved JOB Confirmation screen appears. 13 To send another scanned data, press the [Yes] key. To finish the scanning, press the [No] key. Pressing the [Yes] key brings you back to the Scanner Setting Basic screen. bizhub PRO 1050 Scanner 6-23 6 6. 5 Using the Network Scanner Features Transmission to the SMB server When you send the scanned data to an SMB server, necessary procedures depend on whether the SMB server is registered in advance or it is input manually. When an SMB server is Already Registered 1 Select the [SCAN] tab. The Select Destinations/Storage Locations screen appears. 2 Press the [SMB] key. In the initial settings, the Select Destinations/Storage Locations screen (E-Mail) is displayed. For information on the initial settings of the SCAN tab, contact your administrator of the copier. 3 Press the Name of the destination SMB server. ! Details You can refine the registered destination by the search function. For more information on how to search, refer to "How to Search" on page 3-9. You can refine the Name by the search function. [. . . ] 5-12, 5-15 M Manual Address . . . . . . . . . . . . . . . . . . . . . . . 7-4, 8-25 Mode Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Mode Memory . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 N Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]