User manual KONICA MINOLTA BIZHUB-750-600 PH2 UM COPY 1-1-0

[. . . ] 750/600 User Manual Contents 1 Introduction 1. 1 1. 2 1. 3 Energy Star®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 What is an ENERGY STAR® product?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Trademarks and registered trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Slide the lateral guides in the paper tray against the side of the paper so that there is no gap. Empty the punch dust box Is there a gap between the lateral guides in the paper tray and the side of the paper?Did the message "Remove Punch Scraps. " appear? Even though a Punch setting was selected, holes are not punched. (when PK-504/PK505/ZU-601/ZU-602 is installed on FS-504/FS505/FS-602) If any message other than those listed above appears, perform the operation described in the message. If the problem is not corrected after the described operation is performed, contact your technical representative. bizhub 750/600 (Phase 2) 6-17 6 6. 6 Main messages and their remedies Message Original left on glass. Cause The document was left on the original glass. Paper of a suitable size is not loaded in a paper tray. The document is not positioned correctly. A document with a nonstandard size or with a size too small to be detected is loaded. A setting was selected that gives priority to the setting selected first. Since the maximum amount of copies for the indicated finisher exit tray has been exceeded, the machine is unable to make copies. User authentication settings have been specified. Copies cannot be made unless a user name and its correct password are entered. Account track settings have been specified. Copies cannot be made unless an account name and its correct password are entered. The limit on the number of copies that can be made has been reached. Since a machine door or cover is open or an option is not installed correctly, the machine is unable to make copies. The indicated tray has run out of paper. Since the toner has run out, the machine is unable to make copies. Remedy Troubleshooting Remove the document from the original glass. Either select paper of a different size or load paper of a suitable size. Select the correct paper size. This mode cannot be set with XXX. [. . . ] · When an optional paper tray is selected for "Front Cover Paper" or "Back Cover Paper" of the "Cover Mode" function · When combined with the "Insert Sheet" function · When a Combine Originals setting is selected · When the "Booklet" function is specified · When the "Image Repeat" function is specified The "Mixed Original" setting and "Group" setting can be combined; however, they cannot be combined if a Staple setting is also selected. 14-14 bizhub 750/600 (Phase 2) Appendix 14 Function combination code keys If the cover sheet is thick paper and the paper for the body text is plain paper while using the "Cover Mode" function, a Staple setting can also be selected. In any other case, the settings cannot be combined, the setting specified first is given priority, and a warning message appears. Automatically selected when settings for the "Book Copy" function are selected. If the "Auto Booklet ON When Fold & Staple" parameter is set to "Auto Select Booklet", the setting specified first is given priority and a warning message appears. [. . . ]