User manual KONICA MINOLTA CF 2215

[. . . ] QMS MAGNUM Emulation User's Guide ® ® 1800430-001A Trademarks The following are trademarks or registered trademarks of their respective owners. Other product names mentioned in this manual may also be trademarks or registered trademarks of their respective owners. Registered trademarks are registered in the United States Patent and Trademark Office; some trademarks may also be registered in other countries. Crown, the Crown seal, QMS, MAGNUM, and the QMS logo, are registered trademarks of QMS, Inc. , and Code V is a trademark of QMS, Inc. [. . . ] Access the K Mem Emulation selection and displays a 01356 memory setting with the first digit flashing. Keep 0 as the first digit of this number. MEMORY K MEM FOR SPOOL MEMORY K MEM EMULATION K MEM EMULATION 01356 2-6 QMS MAGNUM Emulation User's Guide Downloading the Emulation Use this key. . . Previous or Next then Select Previous or Next then Select Previous or Next then Select Previous or Next then Select Select The message window reads. . . Move to the second digit and return K MEM EMULATION or advance to 2. 02356 Move to the third digit and return or K MEM EMULATION advance to 0. 02056 Move to the fourth digit and return or K MEM EMULATION advance to 4. 02046 Move to the fifth digit and return or advance to 8. K MEM EMULATION 02048 Verify the K Mem Emulation setting. 02048 IS SELECTED Return (after 3 seconds) to the K Mem Emulation client. MEMORY K MEM EMULATION Downloading the Emulation The QMS MAGNUM emulation comes as a PostScript file on a PC floppy disk. This section describes how to download the QMS MAGNUM emulation from the floppy disk to the printer's hard disk. » Note: At least one hard disk (internal or external) must be installed on the QMS Crown printer before you can download this emulation. If more than one hard disk is available, the emulation automatically installs itself on the disk with the most free storage space. Once the emulation is downloaded, the only way to remove it is to reformat the hard disk (Administration/Disk Operations/Format Disk menu or the PS Executive Series Utilities). Installation 2-7 Using the Emulation Procedure 1 2 3 If necessary, connect the PC to the printer's parallel or serial port. Turn on the printer, and wait for IDLE to appear in the message window. Insert the emulation disk in your PC's 3. 5" disk drive, and change to that drive (for example, if you're using the A drive, type a:). Send the emulation to the printer's hard disk. 4 n If your PC and printer are connected through the parallel port, type copy /b *. ps lpt# where # is 1 to 3. (/b refers to binary files. ) n If your PC and printer are connected through the serial port, type copy /b *. ps com# where # is 1 to 4. (/b refers to binary files. ) 5 When the downloading is complete, reboot the printer. The emulation is ready to be used. Using the Emulation After the QMS MAGNUM emulation is properly downloaded and configured, its options display in the Administration/Emulations/MAGNUM menu. Four configuration choices are available. See the QMS Code V Version II Programming Manual (included in this shipment) for more detailed information on these options. 2-8 QMS MAGNUM Emulation User's Guide Using the Emulation The MAGNUM options (described in the following sections) select the default values used by the emulation when interpreting the various document processing features of your QMS Crown printer. [. . . ] On--Scales variable ratio bar codes to match the overall size of the same bar codes when printed on an impact printer. Default Notes Off If you have a program containing variable ratio bar codes that you printed previously on an impact printer, the bar:space ratio may be too small for your needs when this program is printed on your QMS Crown printer. This is due to the smaller dot size on laser printers. L Installation 2-19 A QMS Customer Support In This Appendix. . n n Sources of customer support QMS world-wide offices Sources of Support Sources of Support Several sources of help and information are available, depending on the type of help you need: Your QMS Vendor Your local vendor (the one from whom you bought the printer) may be best equipped to help you. [. . . ]