User manual KONICA MINOLTA DI7210

[. . . ] User Manual Di5510/Di7210 Recycled paper is used for the inside pages of this book. Di5510/Di7210 User Manual ENERGY STAR® Program The ENERGY STAR Program has been established to encourage the widespread and voluntary use of energy-efficient technologies that reduce energy consumption and prevent pollution. As an ENERGY STAR Partner, we have determined that this product meets the ENERGY STAR guidelines for energy efficiency, based on the following features. Auto Low Power This function conserves energy by lowering the set temperature of the fixing unit. In the standard setting, Auto Low Power operates automatically when 15 minutes have elapsed after completion of the last copy, with the copier remaining in the ready to copy state during that time. The time period for the Auto Low Power function can be set for 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, or 240 minutes. [. . . ] 4 Use the keypad to enter the page numbers for up to 30 insertion locations, touching SET after each entry. · When a page number is larger than the total original count, a sheet is inserted as the last page. · Insertions occur in sequence, even if page numbers are entered out of sequence. · To clear an incorrect entry, touch DELETE or [C] (clear), then enter the correct page number. · When setting more than 15 locations, touch the arrow key to move to the next page. Option: Touch Booklet on the Image Insertion No. Setting Screen to use this function. 5 When all page number entries are made, touch OK. The Application Selection Screen will be restored. Select additional copying features, as desired. 6 Touch OK to complete the setting and return to the Basic Screen. The Store mode is automatically selected. (1) Position originals FACE UP in the EDH. (2) Position an original FACE DOWN on the platen glass, then close the EDH. IMPORTANT: PLACE AND SCAN THE ORIGINALS ACCORDING TO PAGINATION. (4) Remove the original, and repeat for each original. Be sure to press [Start] for each original. Option: Press [Mode Check] to view the selection, and make a Proof copy if desired; then EXIT to return to the Basic Screen. After copying is completed, touch Image Insert on the Application Selection Screen or press [Panel Reset] to release the mode and reset the machine. 9-18 Applications Book Copy Use this function to copy an open book or a ledger sheet onto two 8. 5"x11" sheets in 1-1 mode, or onto the front and back sides of one 8. 5"x11" sheet in 1-2 mode. If you select another paper size, image division will perform incorrectly. The following three modes can be selected from the Book Copy Screen. 1 Full Scan mode: Image division starts from the first scan. 2 Front Cover + Full Scan mode: Image division starts from the second scan, after the first scan copies normally. 3 Front/Back Cover + Full Scan mode: Image division starts from the third scan, after the first and second scan copy normally. Scan and store originals into memory, then print all pages collectively. 11"x17" (ledger) sheet or open book Copy paper size: 8. 5"x11" (letter) Incompatible Basic Copying Conditions: APS, AMS, Rotation Sort, Rotation Group, Folding / Stapling & Folding without Booklet selected / Three-Folding Incompatible Special Originals: Mixed Original, Tab Paper Incompatible Applications: Sheet/Cover Insertion, Combination, Image Insert, Program Job, Repeat, Reduce & Shift in Image Shift, Overlay, Storing image in Overlay Memory 1-1 mode 1-2 mode Application Selection Screen Book Copy Screen 9-19 Applications Book Copy (continued) 1 2 3 4 Load 8. 5"x11" sheets in a tray or in the Multi-sheet bypass tray. [. . . ] 100 sheets (20 lb) feed/exit capacity Original weight: 13~34 lb bond; curl max. 10 mm or less (Transparency, Paste-up, Offset master, Labels, & Intermediate papers unavailable) Paper Source Main body trays 1/2; 1, 500/1, 000 sheets Main body trays 3/4; 500/500 sheets LCC tray 4; 4, 000 sheets Multi-sheet bypass tray; 100 sheets Tray 3/4 user adjustable Tray 1/2 and LCC adjusted by your service representative Paper Exit Tray 150 sheets (20 lb) Paper Weight 16 lb~24 lb bond recommended (Max. range: 16 lb~110 lb (200 g/m2 thick paper) in 1-2 or 2-2 copying, 13 lb~15 lb in 1-1 or 2-1 copying) OHP sheet, Transparency, Labels, Tab, 3-hole Main Body Safety Standard UL 60950; CAN/CSAC 22. 2 No. 60950 -00 3rd version Radio Interference FCC Rules part 15, sub-part B Class A IC CAN/ICES + CSA C108. 8-M1983 Class A Specifications Subject To Change Without Notice 16-3 Specifications Options Finisher (FN-121/FN-10/FN-115) Cover Inserter E Punch Kit (PK-2/PK-5/PK-5 (US 2 HOLES)) Z-Fold Kit (ZK-3) Large Capacity Cassette (C-403/C-404) Expanded Memory Unit (M64-1/M128-1/M2561/M512-1) Printer Controller (Pi7200e) HDD (HDD-2) Machine Weight 450. 8 lb (204. 5 kg) +25. 4 lb (11. 5 kg) w/EDH +121 lb (55 kg) w/FN-121 Finisher +143 lb (65 kg) w/FN-10 Finisher +143 lb (65 kg) w/FN-115 Finisher +23 lb (10. 5 kg) w/Cover Inserter E +4. 4 lb (2 kg) w/PK-2 Punch kit +6. 6 lb (3 kg) w/PK-5 Punch kit +6. 6 lb (3 kg) w/PK-5 (US 2 HOLES) Punch kit +83. 6 lb (38 kg) w/ZK-3 Z-Fold Kit +66 lb (30 kg) w/LCC (C-403) +93 lb (42 kg) w/LCC (C-404) Machine Dimensions Main Body (with EDH) Width: 25. 6 in. [. . . ]