User manual KONICA MINOLTA DIMAGE EX SOFTWARE

[. . . ] Digital Camera E Software Instruction Manual Thank you for purchasing the Minolta Dimâge EX with the DigitaTM operating environment and the Digita DesktopTM software environment from FlashPoint Technology. The Digita DesktopTM software is the driver software for exchanging data between your computer and the Camera. The software lets you: · Display thumbnail previews of images on the computer monitor. · Copy images to the Camera, your hard disk, or removable media such as floppy disks. [. . . ] Note that the name of an image in the camera cannot be changed. Display the hard disk images on the folder panel (p. Click on the image file name to display the cursor (Macintosh: double click). · Windows: As the file extension cannot be changed, it disappears immediately the cursor is displayed. Sets the background colour Saves the settings and closes the window. Cancels the settings and setting and closes the window. The slideshow advances each time the mouse is clicked. The slideshow advances after a fixed interval. Click on the file name of a selected image to display the cursor (Macintosh: double-click). After all settings have been entered, click on OK to save them and close the window. · Now run Quick View to confirm the settings. Enter the new file name from the keyboard. When the new file name has been entered from the keyboard, press the [Enter] key (Macintosh: [Return] key) to save it. · The new file name is displayed. · Clicking on any part of the screen will save the new file name. 46 47 USE OF THE FOLDER PANEL Adding Audio to an Image (Macintosh only) Adds audio to images saved on the hard disk. · The macintosh must have a built-in or attached microphone. Click on Save to save the recorded audio. · When the audio has been recorded the microphone icon at the top-right of the thumbnail image changes to a speaker icon. Display the hard disk images on the folder panel (p. Click and hold on the microphone icon at the top-right of the thumbnail image, and select Record from the pop-up menu. · The Record window appears. Click and hold. Changes to a speaker icon Select Record from the pop-up menu. Click on the speaker icon to display the pop-up menu. Select Play to play back the recorded audio. Select Delete to delete the recorded audio. Click on the speaker icon Record the audio with the Record window. · Record the audio via the internal microphone or a microphone connected to the sound input port. · Begin recording by clicking on the · (Record) button, and finish recording by clicking on the (Stop) button. · Click on the Play button to play back the recorded audio. · You may re-record as many times as necessary. Pop-up menu Play back the recorded audio Delete the recorded audio 48 49 USE OF THE FOLDER PANEL Drag and Drop Operation Images may be copied and moved from the folder panel to Windows Explorer (the Desktop with the Macintosh) with drag and drop operation USING THE IMAGE PANEL The image panel is used to edit and print images, and save them in a variety of formats. Operations Possible With the Image Panel · Enlarge and reduce the displayed size of images (p. · Images may be edited as follows. Cropped Brightness and contrast adjusted Colour adjusted Image smoothing (fine brightness adjustment, edge smoothing) Image flipping Image rotation Change image size · Print images (p. · Save images on the hard disk in the following formats. ( pp. Windows BMP, EXIF, JPEG, PICT, TIFF, Photoshop 3. 0 (PSD), FlashPix Macintosh BMP, EXIF, JPEG, PICT, TIFF Display the hard disk images on the folder panel (p. Start Explorer (Macintosh: Select Finder from the application menu), then select the drive and folder to copy or move the image to. Drag the image to be copied or moved from the folder panel and drop it in Explorer (Macintosh: drop it onto the Desktop). · When the folder displayed in the folder panel and the folder displayed in Explorer (Macintosh: Desktop) are on the same drive the image file is moved. When they are on different drives it is copied. [. . . ] Type D:\DimageEX\Dx6core. exe in the Open text box, then click on OK. 4. Follow the directions that appear on the screen. Dx6core. exe will check for and automatically install DirectX if necessary. DirectX Installation - Windows NT Check the Windows NT start-up screen to determine which Service Pack is installed on your PC. [. . . ]