User manual KONICA MINOLTA DIMAGE SCAN MULTI

[. . . ] Hardware Manual Thank you for purchasing the Minolta Dimâge Scan Multi. The Dimâge Scan Multi is a multiple format film scanner capable of scanning medium format, 35mm, 16mm, and sleeved APS film. With the optional APS adapter, advanced photo system film in the cassette can also be scanned. Your new scanner has extraordinary features, including: · Medium-format film scanning capability. [. . . ] Gently push the adapter into the scanner until the raised insertion mark is aligned with the film-slot door. · The adapter will be automatically guided in past the mark. · If the adapter is not loaded correctly, then eject and reinsert it. 26 EJECTING THE ADAPTER 1. Press the eject button on the front of the scanner. · The adapter will automatically eject partway, then stop. 2. Remove the adapter. · Wait for the Indicator lamp to turn off before removing the adapter. · The adapter should pull out easily. · When the Eject button on the front of the scanner is used, the film will rewind into the cassette before the adapter is ejected, regardless of the software Preference settings. Please refer to the Preferences section in the software manual. · If a film transport error occurs, do not use that cassette in the adapter. · Minolta is not responsible for damage to the cassette. · With some camera models the images will appear up-side-down. Use the Rotate All Frames 180° option in the Preferences. Please refer to the Preferences section in the software manual. 27 CHANGING THE FLUORESCENT LAMP When the indicator light is red and blinks rapidly, check to see of the fluorescent lamp is operational. Replace the fluorescent lamp when it burns out. See your dealer to purchase a replacement lamp unit. CAUTION: Turn off the scanner and allow the unit to cool for 10 minutes before removing the fluorescent lamp. 1. Remove the fluorescent lamp unit cover. 2. Press on the release tab on the plug and disconnect the old lamp. 28 4. Connect the new lamp. · Snap the connectors together until they click. 5. Place the lamp unit in the scanner by aligning the raised edge of the lamp unit 1 with the rectangular notch 2 on the scanner. · The arrows on the lamp and scanner should be lined up. · The lamp unit will not slide from side to side if it is inserted correctly. 6. Hold the lamp unit in place and replace the locking bar. 7. Replace the fluorescent lamp unit cover. 29 IMPORTANT: BEFORE TRANSPORTING THE SCANNER Before transporting the scanner the optics must be parked and locked into place to prevent damage. 1. With the Dimâge Scan Multi software active (utility, TWAIN driver, or plug-in): Windows: press Ctrl + Shift + L. The message informing you the optics will be moved will appear. After the optics have been moved, a message will appear asking you to turn the scanner off. [. . . ] Select File ­ Import ­ Select TWAIN_32 Source. . . · The Select Source dialog box appears. 3. Select DS_Multi 1. 0, then click on Select. 4. Select File ­ Import ­ TWAIN_32. · The start-up screen will briefly appear. The software is ready for use when the Command window appears. LAUNCHING THE UTILITY SOFTWARE Select Start ­ Programs ­ Minolta Dimâge Scan Multi ` DS Multi Utility. · The start-up screen will briefly appear. [. . . ]