User manual KONICA MINOLTA DIMAGE A2

[. . . ] E INSTRUCTION MANUAL 9222-2720-11 SY-A312/0401 2 Examples Before you Begin Thank you for purchasing this Konica Minolta digital camera. Please take the time to read through this instruction manual so you can enjoy all the features of your new camera. Check the packing list before using this product. If any items are missing, immediately contact your camera dealer. DiMAGE digital camera Lithium-ion battery NP-400 Lithium-ion battery charger BC-400 Neck strap NS-DG4000 Lens shade DLS-2 Lens cap LF-1349 Accessory shoe cap SC-10 AV cable AVC-400 USB cable USB-500 Ferrite Core FRC-100 DiMAGE Viewer CD-ROM DiMAGE Instruction Manuals CD-ROM Quick Reference Guide Konica Minolta International Warranty Certificate This product is designed to work with accessories manufactured and distributed by Konica Minolta. [. . . ] Press the shutter-release button partway down or press the exposure-compensation button to complete the operation. The power ratio and the manual flash indicator are displayed on the monitors when the flash is raised. 92 Recording menu The chart lists approximate guide numbers for manual flash calculations. The following equations are useful in determining the guide number (GN), aperture (n), or flash-to-subject distance required for exposures. Guide no. (for distance in meters / feet) Manual flash 1/1 (Full) 1/2 1/4 1/8 M1/16 Camera sensitivity (ISO) 64 6. 3 / 21 4. 5 / 15 3. 2 / 10 2. 2 / 7. 2 1. 6 / 5. 2 100 8 / 26 5. 6 / 18 4 / 13 2. 8 / 9. 2 2 / 6. 6 200 11 / 36 8 / 26 5. 6 / 18 4 / 13 2. 8 / 9. 2 400 16 / 52 11 / 36 8 / 26 5. 6 / 18 4 / 13 800 22 / 72 16 / 52 11 / 36 8 / 26 5. 6 / 18 GN = dist. = n. Flash Notes Maxxum/Program Flash 2500(D), 3600HS(D), 5600HS(D), Macro Ring Flash 1200, and Macro Twin Flash 2400 are compatible with this camera. ADI flash metering works with the three Maxxum/Program flashes attached to the accessory shoe. See the flash manual on how to set ADI metering. The use of other flash units is not recommended. With the Maxxum/Program Flash 5600HS(D) and 3600HS(D), the flash-metering mode will automatically switch to pre-flash TTL when the bounce-flash or wireless/remote function is used, or the flashes are connected to the camera with an off-camera cable. Pre-flash TTL automatically activates when using the macro flash units. When using bounce flash with the Maxxum/Program Flash 2500(D), set TTL with the metering mode switch on the flash unit or pre-flash TTL on the recording menu on the camera. When using the Maxxum/Program flash units, if the flash illumination is uneven at the camera's wide-angle lens position, attach the wide-angle adapter to the flash units. With the 3600HS(D), also change the flash metering mode to pre-flash TTL. When the auto-zoom function is used with the Maxxum/Program 3600HS(D) and 5600HS(D) flash units, the flash's zoom setting will be wider than the lens setting. When using the Macro Ring Flash 1200 or Macro Twin Flash 2400 in macro mode (p. 49), light fall off toward the edges of the frame may be noticeable at the wide-angle macro lens position. 93 AEL Button When the AEL button is pressed and held, the exposure is locked. The exposure remains locked after an image has been captured until the AEL button has been released (hold setting) or pressed again (toggle setting). How the button operates can be changed in section 1 of the recording menu (p. 80). Menu option AE hold The default setting. Press and hold the AEL button to lock the exposure. The exposure remains locked until the AEL button is released. Press and release the AEL button to lock the exposure. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]