User manual KONICA MINOLTA DIMAGE VIEWER V2.1

[. . . ] E INSTRUCTION MANUAL 9222-7300-11 MM-A302 2 BEFORE YOU BEGIN Before installing the DiMAGE Viewer software, read the data-transfer section in the camera manual. This section details how to connect the camera to a computer using the supplied USB cable. The examples in this manual assume the camera is connected to the computer with a USB cable as described in the camera manual. This instruction manual does not provide instruction in the basic operation of personal computers, or the basic operation of Windows or Macintosh operating systems; refer to the manuals supplied with the computer. [. . . ] This will increase the angle of the central portion of the tone curve and increase the contrast of the image without making an overall change in image brightness. By selecting individual color channels on the tone curve, adjustments to the overall color of an image can be made. This can be used to eliminate unnatural color casts or add warmth to a picture. If the image is too red, green, or blue, simply drag the corresponding color-channel curve down until the color appears natural. If the color cast is predominantly one of the secondary colors, cyan, magenta, or yellow, move the curve of the complementary color up. In this example, the image is too yellow. By moving the blue curve up, the image looks more neutral. For more on color, see page 38. 49 ADVANCED IMAGE PROCESSING White, black, and gray-point corrections Advanced image corrections can be made by specifying a white, black, and gray point within the image. Locating an appropriate neutral area within the image is critical to correctly calibrate the software. When the dropper tool is selected, the RGB display is active and can be used to evaluate the image area. All changes are immediately reflected in the displayed image. Click the white-point button. · The mouse pointer changes to the white dropper tool. Click on the brightest neutral area of the image to define it as the white point. · The values of the image will be adjusted based on the selected point. The default level for the white point is 255 for each RGB channel. Click the black-point button. Click on the darkest neutral area of the image to define it as the black point. · The values of the image will be adjusted based on the selected point. The default level for the black point is 0 for each RGB channel. 50 Click the gray-point button. · The gray point controls the color of the image. Click a neutral area of the image to be defined as the gray point. · The area used to calibrate the gray point must be neutral. The brightness level of the area is not important, but if the area has a definite color, the image will not be color balanced correctly. [. . . ] Click the open button to complete the operation. · CMY or CMYK printer profiles are not compatible with the DiMAGE Viewer software. ICC profiles can be found in the following locations: Windows 98/98SE/Me: [Windows] folder > [System] folder > [Color] folder. Windows 2000: [WINNT] > [System32] > [spool] > [drivers] > [color] Windows XP: [Windows] > [System32] > [spool] > [drivers] > [color] Macintosh: [System folder] > [ColorSync Profile folder] Macintosh OS X: [Library] > [ColorSync] > [Profiles] > [Displays] 80 When loaded correctly, the ICC profiles will be displayed in the color preference window. The profiles can be temporarily disabled by clicking on the monitor or printer ICC profile check boxes. ICC profiles for specific monitors or printers are available from the manufacturer. [. . . ]