Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KONICA MINOLTA DYNAX MAXXUM 500SI. We hope that this KONICA MINOLTA DYNAX MAXXUM 500SI user guide will be useful to you.
Lastmanuals help download the user guide KONICA MINOLTA DYNAX MAXXUM 500SI.
Manual abstract: user guide KONICA MINOLTA DYNAX MAXXUM 500SI
Detailed instructions for use are in the User's Guide.
[. . . ] When you are ready for full control, move on to Level III and the ASM exposure modes. The information in this manual is relevant for products introduced before March, 1998. Contact the nearest authorized Minolta Service facility to obtain compatibility information for products released after this date.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] · The shutter speed is automatically set to 1/125 or slower. · A smaller aperture (larger f-number) will result in a shorter flash range. Refer to Flash Range (p25) to determine the range of the built-in flash at the selected aperture.
Large Aperture (small f-number)
Small Aperture (large f-number)
If 125 blinks in the viewfinder and the data panel, the light level is too bright for the selected aperture. Turn the control dial until the blinking stops or cancel the flash.
The size of the aperture (lens opening) determines the depth-of-field in the final image as well as the intensity of the light falling on the film. Depth-of-field is the range in front of and behind the focus point that appears sharp in the final image. In the viewfinder, only the plane the camera is focused on will appear sharp. The photographed image however, will have a depth-of-field corresponding to the selected aperture. Large apertures (small numbers) limit the depth-of-field to a narrow range in front of and behind the point of focus. Set a larger aperture when photographing portraits to make your subject stand out from the background. Small apertures (large numbers) provide greater depth-of-field. Set a small aperture when photographing landscapes to ensure your entire scene is sharp.
· Usable apertures will depend on the aperture range of the lens you are using.
Cancelling the Flash
Push the built-in flash down or turn the accessory flash off. Compose the scene and focus on your subject.
· If the scene is too dark for autofocus to operate, press the focus-mode button and focus the lens manually (p53).
1. Set the camera to M-mode, then turn the control dial until appears in the data panel.
5. Firmly press the eyepiece cap into the eyepiece.
· The eyepiece cap prevents light from entering thru the viewfinder and affecting the metered exposure.
6. Press and hold the shutterrelease button to take the picture.
· The shutter remains open as long as the button is pressed.
3. Press the exposurecompensation button and turn the control dial to select the aperture.
48
49
FOCUS Wide Focus Area
Wide focus area uses the camera's three focus sensors to automatically focus on your subject. The wide focus area provides greater framing flexibility and makes it easier for the camera to focus on moving subjects. Wide focus area is the camera's standard focus mode.
ADDITIONAL F E AT U R E S
The camera determines which sensor is focusing on your subject and sets the focus accordingly.
· The focus areas are not visible in the viewfinder frame.
The focus area indicator in the viewfinder tells you which sensor the camera is using.
51
FOCUS Spot AF
Spot AF uses the center focus sensor and the current metering mode (p55) to lock focus and exposure. The focus and exposure settings remain locked until the spot AF button is released.
FOCUS Manual Focus
Focus the lens manually when autofocus is not suitable and focus hold is not possible. The autofocus system will monitor focus and indicate when a subject in the focus frame is in focus.
1. Place your subject inside the spot-focus area.
1. Press and hold the spot AF button.
· Focus is confirmed when the viewfinder. [. . . ] For long periods, place the camera in an airtight container with a silica gel drying agent. · Periodically release the camera's shutter to keep it operating properly. · Before using after prolonged storage, check the camera's operation to make sure it is functioning properly.
Questions and Service
· If you have questions about your camera, contact your local camera dealer or write to the Minolta distributor in your area. · Before shipping your camera for repair, please contact an authorized Minolta Service Facility for details.
84
85
SPECIFICATIONS
Camera Type: Lens Mount: Viewfinder: Shutter Type: Speeds: Flash sync speed: Focus Type: 35mm SLR with built-in flash, autoexposure (AE), and action predictive autofocus (AF) Minolta A-type bayonet mount SLR roof mirror type, 90% field of view, Magnification: 0. 75X Electronically-controlled, vertical-traverse, focal-plane type 30 sec. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KONICA MINOLTA DYNAX MAXXUM 500SI
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KONICA MINOLTA DYNAX MAXXUM 500SI will begin.