User manual KONICA MINOLTA FK-101

[. . . ] Instruction manual Part - Facsimile Instruction manual Part - Facsimile FK-101 Be sure read and study this instruction manual before using the device and keep it in the pocket provided on a side panel of the device for the convenience of reference later. FK-101 Thank you purchasing Konica FK-101 (facsimile). This instruction manual describes the operating procedures and safety precautions of the Konica FK-101 so that you can handle it safely and make the best of its capabilities. Usually keep this manual in the pocket provided on a side panel of the device for the convenience of reference later. Use of Control Panel Types of screens Wake-up Screen CONTENTS Chapter 1 Before Use 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 Use of Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Types of Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For more detail, see "5. 17 Setting up transmission/reception function". · We define the originating station (fax) as that which issues a relay request, the relay station (fax) as that which relays transmissions, and the terminating stations (fax) as that which receive and terminate communications. · To use Relay Tx Req, a Relay Box No. , relay password and destination group No. must be defined in the relay station (fax). · When you intend to use your FK-101 as a relay station (fax), define the Relay Box No. , relay password and destination group No. of your station and give the information defined to the originating station (fax). See "5. 4 Registering relayed transmission to multiple station". [Specifications of Relay Tx Req] Relay Tx Req can be used only when the relay station (fax) incorporates the F-code feature. See p. 4-60 "F-code" for the F-code. Manual Transmission Interrupting Transmission Confirmation of Transmission Reservation Documents Confirming Setting and Communication Results Intercepted Transfer of Received Documents Resending (Restored transmission) Sender Information Reception Mode Manual Reception Forced Memory Reception [Functions incompatible with Relay Tx Req] Polled Tx, Polling Rx, Confiden. Tx, Bulletin, ID Tx When Unable to Receive Reception Information Application Functions Registration /Setup Reports and Lists Troubleshooting 4 - 63 Appendix Chapter 4 Application Functions 4. 19 Relay Tx Req (continued) [Procedure] 1. Press the Fax button on the control panel to view the Fax Basic screen, if it is not already displayed. Press the Application button on the control panel. The Fax Application Menu screen appears. The Relay Tx request setup screen appears. Fax Application Menu screen 5. of the relay station(sub-address) in the Box No. and the relay password of the relay station in the Password box from the key pad. [NOTE] · · · · The [Box No. ] (sub-address) and [Passwaord] are a number of up to 20 digits. Numerals of 0-9, and symbols # and * can be used for the [Password]. To correct the wrong entry, use the [DELETE] key. If you press the Stop/Clear button, the information you have entered will be deleted. Relay Tx request setup screen 6. Relay request is set up and you return to the Fax Application Menu screen. [NOTE] To release the setting, press the [CANCEL] key. 4 - 64 Use of Control Panel 4. 19 Relay Tx Req (continued) Types of screens 7. Set other functions if necessary. Press the [OK] key. [. . . ] 5-70 Setting up Fax transfer . . . . . . . . . . . . . . . . . . . . . 5-74 Size Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 P Page divided print . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-59 Paper tray for reports . . . . . . . . . . . . . . . . . . . . . . . [. . . ]