User manual KONICA MINOLTA FS-601 UNPACKING/SET-UP INSTRUCTIONS

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KONICA MINOLTA FS-601. We hope that this KONICA MINOLTA FS-601 user guide will be useful to you.

Lastmanuals help download the user guide KONICA MINOLTA FS-601.

Download

You may also download the following manuals related to this product:

KONICA MINOLTA FS-601 PARTS MANUAL (2275 ko)

Manual abstract: user guide KONICA MINOLTA FS-601UNPACKING/SET-UP INSTRUCTIONS

Detailed instructions for use are in the User's Guide.

 [. . . ] Attach the enclosed stabilizing pin and magnet plate with the enclosed screws C to the left side of the machine as shown. 

4698U055AB 4698U105AA 4583U013AA

3. Place the Ground Plate furnished with the kit in Rail Guide B. 

4583U015AA 4684U063AB

4583U014AA

4. Attach the Rail guide B to the bottom left part of the machine (two screws D furnished with the finisher). NOTE Fit Rail Guide B in the tab on the lower portion of the Paper Feed Unit. 
4698U101AA 4684U064AA

­3­

FS-601 I Installing the Horizontal Transport Unit
1.  [. . . ] Open the front door and slide out the staple unit. Remove the staple cartridge from its protective bag. Insert the staple cartridge into position until a click is heard. Close the front door. 

4698U064AA

4698U099AA

4698U102AA

5. Turn the adjusting screw to make the adjustment. To raise the finisher,  turn the adjusting screw counterclockwise. To lower the finisher,  turn the adjusting screw clockwise. 
4698U065AA

I Connecting the Hookup Cord
1. Remove the connector covers from the horizontal transport unit and the machine. Connect the hookup cord to the horizontal transport unit and the machine. 

6. Reinstall the caster covers and adjusting screw covers. 
4583U011AA

­6­

FS-601 I Adjusting the Staple Position and Fold Position
<Adjusting Center-Staple Position> ­ Machine equipped with an AFR ­ 1. Select the functions as follows: Orig Copy4in1/BookletBookletBind. (For details of how to display the Tech. Mode screen,  see the Service Manual. ) 8. Load a 5-page A3L document (blank sheets of paper may be used) in the document feeding tray. * Use a 5-page document to minimize variations. * From here on,  follow procedures starting with step 7 onward given on the right-hand half of this page. ­ Machine not equipped with AFR ­ 1. Select the functions as follows: Orig Copy4in1/BookletBookletBind. 

4036P031CA

9. Touch "Center Binding Position. "

4036P036CA

3. Place an A3L original (a blank sheet of paper may be used) on the original glass. Press the Start key five times (to let the machine scan the original five times). * Use a 5-page set to minimize variations.  [. . . ] * Use a 5-page document to minimize variations. * From here on,  follow procedures starting with step 7 onward given on the right-hand half of this page. 

4036P036CA

­8­

FS-601 I Affixing the Labels
10. Touch "Fold-Position. " Affix the labels to the position shown below. Check for any deviation between the stapled position and the folded crease.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KONICA MINOLTA FS-601

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KONICA MINOLTA FS-601 will begin.