User manual KONICA MINOLTA IP-303

[. . . ] 7065 Recycled paper is used for the inside pages of this book. Konica 7065 Workgroup Document SystemTM User's Manual ENERGY STAR® Program The ENERGY STAR Program has been established to encourage the widespread and voluntary use of energy-efficient technologies that reduce energy consumption and prevent pollution. As an ENERGY STAR Partner, Konica Corporation, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency grounding it on the following features. Auto Low Power This function conserves energy by lowering the set temperature of the fixing unit. In the standard setting, Auto Low Power operates automatically when 15 minutes have elapsed after completion of the last copy, with the copier remaining in the ready to copy state during that time. [. . . ] Screen 1-sided originals Copies in Chapter mode Tilte page 2-sided originals Title pages 5 7 3 78 5 34 12 4 6 1 2 6 2 8 4 6 7 5 3 1 Title pages Title page 9-8 Applications 8 Applications Chapter (continued) 1 Press [APPLICATION] to display the Application Selection Screen. 3 Use the keypad on the control panel to enter the page number of each title page. To clear an incorrect entry, touch DELETE or press [C] (CLEAR QTY. ). To enter the correct page number, touch SET and use keypad. 5 Repeat this for each title page number you want to appear on the right hand side. Be sure to touch OK after each page number entry, up to a total of 15 entries. Option: Touch Booklet on the Chapter Insertion Setting No. To change the selection of paper tray for copying title pages, touch Copy Insertion on the screen. 6 When all entries are made, touch OK. 8 Position originals FACE UP on the document feeder. When using Platen memory copy, position original(s) on the platen glass and press [STORE] to scan. When using the RADF memory copy, position original(s) in the document feeder and press [STORE] to scan. 6-27. Option: Press [CHECK] to view the selection, and make the Proof copy, if desired; then touch EXIT to return to the Basic Screen. After copying is completed, touch Chapter on the Application Selection Screen or press [AUTO RESET] to release the mode and reset the machine. NOTES: 1. Entering the same page number twice will prevent the copier from proceeding to the next operation. Chapter insertions occur in sequence even if original page numbers are entered out of sequence. When a page number is larger that the total original page count, insertion occurs as the last page of the document. Applications 9-9 Applications Combination Use this function to lay out and copy a fixed number (2, 4, or 8) of pages onto one sheet of copy paper (2 in 1, 4 in 1, or 8 in 1). Combination Specifications Ì Scan and store originals into memory. Memory copy is also available; in this case, use platen glass. (Normally the fixed size of Tray 1 will be selected. ) Ì Original/Copy size: 11"x17", 8. 5"x14", 8. 5"x11"R, 8. 5"x11", 5. 5"x8. 5" Ì Incompatible Basic Copying Conditions: APS, Group, Folding/ Stapling & Folding/ Trimming with Booklet Ì Incompatible Original Scanning Conditions: Resolution (Very high), Mixed Original, Non STD size Ì Incompatible Applications: Sheet/Cover Insertion, Chapter, Booklet, Transparency Interleave, Image Insert, Book Copy, Program Job, Non-image Area Erase, Repeat, Frame/Fold Erasure, AUTO Layout, Thin/Thick Paper, Overlay Application Selection Screen Combination Mode Selection Screen Layout Original Portrait type 1 1 2 3 4 2 1234 5678 1 2 2 4 1 3 1357 2468 2 in 1 4 in 1 8 in 1 2 in 1 4 in 1 8 in 1 Landscape type 1 2 1 3 2 4 1 3 5 7 2 4 6 8 1 2 1 1 2 3 4 2 3 4 5 6 7 8 9-10 Applications Applications Combination (continued) 1 Press [APPLICATION] to display the Application Selection Screen. 2 Touch Combination to display the Combination Mode Selection Screen. 3 Touch 2 in 1, 4 in 1, or 8 in 1 and select one key between the two in the Layout area, referring to the illustration on the left. 4 Touch OK to return to the Application Selection Screen. [. . . ] size: 11"x17" (280mmx432mm) Specifications Subject To Change Without Notice 16-2 Machine Specifications Specifications Originals in Document Feeder ADF mode: 1>1; 1>2 11"x17"; 8. 5"x14"; 8. 5"x11"R; 8. 5"x11"; 5. 5"x8. 5" Max. 50 sheets (20 lb) feed/exit capacity RADF mode: 2>2; 2>1 11"x17"; 8. 5"x14"; 8. 5"x11"R; 8. 5"x11"; 5. 5"x8. 5" Max. 50 sheets (20 lb) feed/exit capacity Mixed mode: 11"x17"+8. 5"x14"+8. 5"x11"+5. 5"x8. 5" or 8. 5"x14"+8. 5"x11"R, 8. 5"x11", 5. 5"x8. 5" Max. 50 sheets (20 lb) feed/exit capacity Original weight: 13~34 lb bond; curl max. [. . . ]