User manual KONICA MINOLTA KD200Z

[. . . ] Digital Still Camera User's Guide Thank you for your purchase. For the correct usage of this product, please read this User's Manual and the warranty card carefully and keep them in a safe place for future reference. Before accepting the warranty card, please make sure that the date of purchase and the dealer's details have been completed. 1 About trademarks G Windows 98, Windows 98SE, Windows 2000 Professional and Windows Me are trademarks or registered trademarks of Microsoft Corporation in the U. S. G Apple, Macintosh, Mac OS, QuickTime and Power PC are trademarks or registered trademarks of Apple Computer in the U. S. [. . . ] t y Record using the set conditions. (See "Recording" (page 23). ) 3 Advanced Recording Note: * The menu settings that have been made will be saved even when the power is turned off. * The settings set in the M-REC menu will not be have any effect when the main switch is set to (auto mode). 37 Recording a Movie Movies can be recorded with this camera. The available recording resolutions are: 320 X 240 pixels and 160 X 120 pixels. The maximum recording time for a movie is about 15 seconds and recording continues while the shutter button is held down. Note: When the movie mode is set, all menus with the exception of "Reset All" and "Screen Contrast" will become unavailable. (Each menu can again be accessed by turning the movie mode off. ) q Enter the M-REC menu mode and press the / button to select "Movie mode". / button to select the menu q M-REC Reset All Movie mode Off Off ±0 Auto Digital Zoom Camera Exposure White Balance w Press the content. The setting will change as follows every time the / button is pressed. Off (default setting) 320 x 240 160 x 120 e Press the SET button to exit the M-REC menu mode. Through images will be displayed on the LCD monitor with a yellow frame. And the resolution will be displayed in the upper left of the screen, and the recording time will be displayed in the upper right of the screen. The movie will be recorded while the shutter button is held down. During recording, "REC" will appear on the right side of the screen in red and the recorded time will be displayed. Note: icon will appear on the status LCD. * When movie mode is selected, the * When the movie mode is selected and the main switch is set to , the LCD monitor will automatically turn on and display through image. (The LCD monitor will not turn off even when pressing the DISPLAY button. ) * The optical zoom will not operate during movie recording. (Perform the operation before pressing the shutter button. ) Yellow frame Yellow frame Through image w M-REC Reset All Movie mode Digital Zoom Camera Exposure White Balance 320×240 Off ±0 Auto e 320×240 0:00 r 320×240 0:05 REC 38 Using the Digital Zoom By combining the optical zoom (3×) and digital zoom (1. 5×, 2×), images can be recorded with a zoom of 4. 5 times to 6 times the original size. The digital zoom can only be used when optical zoom is set to TELE (3×). q Enter the M-REC menu mode and press the / w e button to select "Digital Zoom". q M-REC Reset All Movie mode Digital Zoom Off Off ±0 Auto Press the Camera Exposure White Balance 3 Advanced Recording Press the SET button to exit the M-REC menu mode. w button until the optical zoom button again. M-REC Reset All Movie mode Digital Zoom Camera Exposure White Balance Off On ±0 Auto r Press the press the stops. Then, release the 5 WAY button and A blue frame will appear on the LCD monitor and the magnification ratio will be displayed on the top right. Use the LCD monitor as the viewfinder for recording. Note: * Pressing the r ×2 / button each time will switch the magBlue frame nification between 1. 5× and 2× (zoom magnification will not change if the button is held down). * Digital zoom cannot be used when the LCD monitor is off. [. . . ] *2: DCF (Design rule for Camera File system) is a standard by JEITA mainly for the purpose of simplifying the use of image files taken by digital cameras with other related devices. 77 Warranty and After-sales Service For repair, handling and care, first consult the dealer from whom you purchased the camera. Warranty (separately attached) Before accepting the warranty card, please make sure that the date of purchase and dealer of purchase and the dealer's details have been completed. After reading the warranty, keep it in a safe place. Warranty period (main unit): 1 year from the date of purchase During the warranty period Repairs will be made by the dealer from whom you purchased the camera according to the contents of the warranty. For repair, take the product and the warranty to the dealer from whom you purchased the camera. Outside the warranty period Repairable products can be repaired for a charge upon request. [. . . ]