User manual KONICA MINOLTA KM-7145 COPIER

[. . . ] INSTRUCTION MANUAL Basic Advanced Copier INSTRUCTION MANUAL Thank you very much for your purchase of the 7145. This Manual deals with making copies, correct handling of the machine, and precautions for safety. In order to maintain a satisfactory copying performance, please keep this Manual readily available for reference in the side pocket of the machine. ENERGY STAR® Program The ENERGY STAR Program has been established to encourage the widespread and voluntary use of energy-efficient technologies that reduce energy consumption and prevent pollution. As an ENERGY STAR Partner, we have determined that this product meets the ENERGY STAR guidelines for energy efficiency grounding it on the following features. Auto Low Power This function conserves energy by lowering the set temperature of the fixing unit. [. . . ] For details on scanning originals in Front cover + Facing pages and Front/Back + Facing pages mode, see the description on the following page. Dual Page Flip Side 2 Non-Image Area Erase Reverse Image 10. Repeat steps 9 and 10 for all originals. When using platen glass, Non-Image Area Erase and AUTO Layout are automatically selected. DO NOT CLOSE the document feeder throughout the scanning job. Repeat Frame/Fold Erasure AUTO Layout 12. Press [START]. The copier will start printing when ready for output. Applications 9 Stamp Overlay When the finisher / paper exit / inner tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. Image Shift Reduce & Shift 9-23 Dividing an Image into Right and Left Pages (Dual Page) (continued) Scanning Original for Cover Use platen glass for scanning original for cover. Position original for front cover FACE DOWN on the platen glass. When Front/Back + Facing pages is selected, scan original for back cover according to the above steps 2 and 3. 5 Use platen glass or document feeder, as required, for scanning body text originals. To output the set in the same order as the originals, start scanning from the first page. 7 Repeat steps 5 and 6 for subsequent originals. "Front Cover + Facing pages" SURVEYOR'S REPORT 4 23 56 9 10 78 Scan from first page SURVEYOR'S 1 REPORT Copies "Front/Back + Facing pages" 4 23 56 9 10 78 SURVEYOR'S REPORT SURVEYOR'S REPORT Scan from first page SURVEYOR'S 1 REPORT Copies "Front Cover + Facing pages" SURVEYOR'S 1 REPORT 4 23 56 9 10 78 Copies "Front/Back + Facing pages" SURVEYOR'S REPORT SURVEYOR'S 1 REPORT 56 9 10 78 4 23 Copies NOTES: · Memory overflow may occur during scanning. · When using platen glass, Non-Image Area Erase and AUTO Layout are automatically selected. DO NOT CLOSE the document feeder throughout the scanning job. 9-24 Reverse the Second Side in 1-2 Mode (Flip Side 2) 1-2 Flip Side 2 arranges the even pages of simplex originals upside down on the reverse side of duplex copies. Similarly, 2-1 Flip Side 2 rearranges the reverse sides of duplex originals which read upside down to make normal simplex copies. Specifications for Flip Side 2 1-2 Flip Side 2 functions only when 1-2 copy mode is selected. 2-1 Flip Side 2 functions only when 2-1 copy mode is selected and RADF is used. Incompatible Conditions: Mixed Original, Non-Standard Size, Combination, Booklet, Dual Page, Non-Image Area Erase, Repeat, AUTO Layout, Image Shift 1-2 Flip Side 2 1 2-1 Flip Side 2 3 3 1 Dual Page Combination Application Selection Screen Sheet/Cover Insertion Chapter Booklet OHP Interleave Image Insert 2 1 2 3 2 Flip Side 2 Non-Image Area Erase Reverse Image Right/Left bound duplex originals 1 3 Simplex originals 2 2 3 2 1 3 3 1 1 Repeat Frame/Fold Erasure AUTO Layout 2 Right/Left bound duplex copies 1 2 2 3 1 3 Top/Bottom bound duplex originals Top/Bottom bound duplex copies 1 2 3 Applications 9 Stamp Overlay Simplex copies Image Shift 1. Touch APPLICATION on the Basic Screen. Reduce & Shift When starting a new copying job, be sure to close the RADF securely, then press [AUTO RESET]. 9-25 Reverse the Second Side in 1-2 Mode (Flip Side 2) (continued) 2. Touch Flip Side 2 on the Application Selection Screen. The Flip Side 2 Screen will be displayed. 3. Touch the desired binding type key. 4. 8. Touch OK. The Application Selection Screen will be restored. Touch OK on the Application Selection Screen. The Basic Screen will be restored. Select additional copying features, as desired. Enter the desired print quantity from the control panel keypad. See p. 3-7 for details on setting print quantity. Position original(s) FACE UP in the document feeder or FACE DOWN on the platen glass. When selecting 2-1 Flip Side 2 mode, use RADF to scan originals. · See p. 3-6 for details on positioning originals. 3-27) when the original count exceeds 50. 9. Press [START]. When the finisher / paper exit / inner tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. 9-26 Erasing Outside of the Original (Non-Image Area Erase) The Non-image area erase mode is used to copy non standard or special originals, such as books, magazines, paste-ups, graphs, thick or thin materials, etc. The exposed glass area outside the borders of the original will not be copied. Specifications for Non-Image Area Erase Use the platen glass only. [. . . ] For password authentication, success or failure will be indicated as OK and NG. For operations without password authentication, all log entries will be indicated as OK. - 29 - Key Operator Security Functions (continued) Table of items saved in audit log No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Operation ID Action ID 01: CE_ID (fixed) 02: Key Operator ID (fixed) 03: Set/change security mode 04: Print audit log 05: Change/register CE password 06: Change/register Key Operator password 07: Create user box 08: Change/register box password by Key Operator (1) 09: Delete user box 10: Change attributes of user box 11: Password authentication for user box 12: Change attributes of user box 13: Access to document 14: Delete document 15: Change attribute of document 16: Password authentication for confidential printing 17: Password authentication for fax confidential printing 18: Access to confidential print document 19: Delete confidential print document 20: Create fax confidential inbox 21: Change password for fax confidential inbox 22: Change attribute of fax confidential inbox 23: Access to document in fax confidential inbox 24: Delete document in fax confidential inbox Result OK/NG OK/NG OK OK OK OK OK OK OK OK OK/NG OK OK OK OK OK/NG OK/NG OK OK OK OK OK OK OK CE authentication CE ID Key Operator authentication Key Operator ID Set/change Enhanced Security mode Key Operator ID Print audit log Key Operator ID Change/register CE password CE ID Change/register Key Operator password CE ID Create user box Box No. Change/register box password by Key Operator Box No. Password authentication for user box Box No. [. . . ]