User manual KONICA MINOLTA KN-303

[. . . ] INSTRUCTION MANUAL IP-421 Read this manual before printing. Keep readily available for reference. Thank you very much for purchasing the IP-421. This INSTRUCTION MANUAL includes instructions for making prints, correct handling of the machine, and precautions for safety. Please read this manual before printing. [. . . ] Default for the number of copies is 1. 3-22 Print Controller INSTRUCTION MANUAL Chapter 3 Printer Driver Separation Define how far apart you want multiple watermarks to be on the page. If you have set the count to one, this will be unavailable. Font Name You can select only one font per watermark from the list shown by clicking the [M] button. When you change the font, the preview window will refresh itself by showing the effect of the new font on the existing text sample displayed there. Select [Black], [Dark Gray], [Light Gray], or [White] from the color palette shown, by clicking the [M] button. Darkness You can control the "density" of the watermark text with this slider. If you slide this to the right, the "density" of the watermark text will be more dense. If you slide this to the left, it will be less dense. Bold & Italic When [Bold] is selected, bold formatting will be applied to your selected watermark text. When [Italic] is selected, italic formatting will be applied to your selected watermark text. When both of these are selected, bold and italic formatting will be applied. Size Select a point size for the font to be used in your watermark by clicking the [L] or [M] button or by directly entering the size from the keyboard. Position Control the position of the watermark on the page manually or leave it at the automatic setting and let the driver position it for you. If you select [User defined], the controls below this option will be available and you can define X axis position (left and right) and Y axis position (up and down) of the watermark on the page by clicking the [L] or [M] button or by directly entering the values from the keyboard (0-100). The value of [X] or [Y] represents the placement of origin (beginning) of the watermark in a percentage of the total page width. In case of [X], a value of 20% means the watermark begins 20% of the way across the page from left to right. In case of [Y], a value of 20% means the watermark begins 20% of the way down the page from top to bottom. Angle Control the "lean" angle of the watermark by sliding this control back and forth or by typing a number in the text value box from 0 degrees to 360 degrees (a full circle all the way around). Print Controller INSTRUCTION MANUAL 3-23 Chapter 3 Printer Driver Adjustment type Select [Move] or [Rotate] by clicking the radio button. When [Move] is selected, you can move the watermark as you position it manually by clicking on the page sample and "dragging" the mark around. When [Rotate] is selected, you can rotate the watermark as you position it manually by clicking on the page sample and "dragging" the mark around. Show layout / Show single page When [Show layout] button is clicked, you can preview how your [pages per sheet] options selected in the [Options] tab will look with the current watermark settings. The [Show layout] button will change to the [Show single page] button by clicking it. When the [Show single page] button is clicked, you can preview how the single page will look with the current watermark settings. The [Show single page] button will change to the [Show layout] button by clicking it. New When the [New] button is clicked, [Custom watermark n] appears in the [Text] box. Create the new watermark text, to replace the current text by typing the new text and pressing the [Enter] key. [. . . ] If the optional hard disk is not connected and data are transmitted both via parallel port and network simultaneously, the print controller may not work correctly. Notice: Specifications are approximate and subject to change without notice. Print Controller INSTRUCTION MANUAL Appendix B-3 Appendix C Font List IInternal Font List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Appendix C-2 Print Controller INSTRUCTION MANUAL Appendix C-1 Appendix C Font List I Internal Font List IP-series Printer Internal Fonts list Appendix C-2 Print Controller INSTRUCTION MANUAL Appendix C Font List Print Controller INSTRUCTION MANUAL Appendix C-3 INDEX INDEX A [About] tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26 Add Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 B Back Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]