User manual KONICA MINOLTA MAGICOLOR 6110

[. . . ] magicolor 6110 User's Guide ® 1800647-001A Thank You Thank you for purchasing a magicolor 6110. Your magicolor 6110 is specially designed for optimal performance in Windows, Macintosh, and networking environments. Trademarks The following are registered trademarks of MINOLTA-QMS, Inc. : QMS, the MINOLTAQMS logo, Crown, CrownNet, and magicolor. Minolta is a trademark of Minolta Co. , Ltd. Other product names mentioned in this guide may also be trademarks or registered trademarks of their respective owners. Proprietary Statement The digitally encoded software included with your printer is Copyrighted © 2001 by MINOLTA-QMS, Inc. [. . . ] Replace it with a new toner cartridge. ABCDE ABCDE ABCDE ABCDE 92 Solving Problems with Printing Quality Symptom Image defects cyclical (evenly spaced). Cause Solution Lateral image defects Clean the laser lens cover. Lateral image defects Replace the color toner cartridge. Lateral image defects Replace the OPC belt cartridge. Lateral image defects have other spacing. Abnormal areas (white or black belt or spots) appear. The toner cartridge may be defective. Remove the toner cartridge and check for damage. If necessary, replace it. The OPC belt cartridge Check the surface of the OPC belt, gently may have a foreign clean up the foreign particle using a soft, dry particle on it. cloth, and replace the OPC belt if necessary. The OPC belt cartridge Remove the OPC belt cartridge and check the may be defective or photosensitive surface (the green surface) for scratched. Remove the fuser oil roller and check the roller surface for dirt or scratches. If necessary, replace the fuser oil roller. ABCDE ABCDE ABCDE ABCDE The fusing unit may be Contact your service provider or Technical defective. See the Service & Support Guide for support telephone numbers. Solving Problems with Printing Quality 93 Symptom Lateral (horizontal) lines or bands appear on image. Cause Solution The printer is not on a Level the printer (not exceeding 1. 5° slant). The media path is dirty Print several sheets and the excess toner with toner. Remove the toner cartridge and check for damage. If necessary, replace it. The OPC belt surface Remove the OPC belt cartridge and check the is scratched or damgreen photosensitive surface for scratches. necessary, replace the OPC belt cartridge. The transfer roller is misinstalled or defective. Lateral (horizontal) lines appear cyclically (evenly spaced) on image. Remove the transfer roller and reinstall it. Make sure the transfer unit is closed. Lateral lines have 1­2 Replace the laser lens cover. Replace the OPC belt cartridge. Lateral lines have 204 Replace the fusing unit. Trailing edge 35 mm, other spacing Replace the OPC belt cartridge. 94 Solving Problems with Printing Quality Symptom Vertical streaking appears. Cause The laser lens cover may be dirty. Solution Check to see if the laser lens cover is dirty. If necessary, clean it with a clean soft cloth. The corona wire inside Clean the corona wire. One or more toner car- The item may be defective or misinstalled. [. . . ] The toner cartridges in your magicolor 6110 do not contain a print drum and, therefore, are not sensitive to light. The set of starter toner cartridges that are shipped with the printer have less capacity and will only print 1/2 of the number of pages listed for replacement toner cartridges. Waste toner pack Ozone filter 18, 000 pages** at 5% coverage of each color 12 months Print Media 193 Notes *A plane is a single pass of the OPC belt (one toner color). For example, a one-color, single-sided (simplex) print job makes one pass (one plane), and a two-color print job makes two passes (two planes). [. . . ]