User manual KONICA MINOLTA MAGICOLOR 4695MF

[. . . ] magicolor 4695MF Printer / Copier / Scanner User's Guide A0FD-9565-00A 1800862-001A Thank You Thank you for purchasing a magicolor 4695MF. Your magicolor 4695MF is specially designed for optimal performance in Windows, Macintosh and Linux environments. Trademarks KONICA MINOLTA and the KONICA MINOLTA logo are trademarks or registered trademarks of KONICA MINOLTA HOLDINGS, INC. magicolor and PageScope are trademarks or registered trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. All other trademarks and registered trademarks are the property of their respective owners. Copyright Notice Copyright 2008 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. , Marunouchi Center Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan. [. . . ] After all document pages have been scanned, specify the desired number of copies using the keypad, and then press the Start-Color key or the Start-B&W key to begin printing. 166 Making Advanced Copies 8Using the Scanner Scanning From a Computer Application Documents can be scanned from a computer connected to this machine with a USB cable or via a network. Scanning settings can be specified and the scanning operation can be performed from TWAIN- or WIA-compatible applications. From the scanner driver, a preview can be displayed and various adjustments, such as the size of the scan area, can be specified. For details on the installation of the scanner driver or network TWAIN settings, refer to the Installation Guide on the Documentation CD/ DVD. Basic Scanning Operation 1 Position the document to be scanned. For details on positioning the document, refer to "Placing a document on the original glass" on page 135 and "Loading a document into the ADF" on page 136. 2 3 4 5 168 Start the application to be used for scanning. Start the scanner driver according to the application settings. Specify the necessary scanner driver settings. Click the Scan button in the scanner driver. Scanning From a Computer Application Windows TWAIN Driver Settings Load Specify a saved settings file (dat file) for scanning. Save Save the current settings as a settings file (dat file). Default Return all settings to their defaults. About icon Click to display the software version information. ADF With scanning documents from the ADF, select whether to scan only the front side or both sides of the document. Original Size Specify the original size. Scale Specify the enlargement or reduction ratio for the selected area. If the resolution is set at 1200 1200dpi or higher, a setting larger than 100% cannot be specified. When Manual is selected, a tab appears so that detailed settings can be specified, for example, for Brightness/Contrast and Filter. The parameters that can be set differ depending on the scanning mode that is selected. If Auto is selected as the scanning mode, scanning from the original glass is performed after a prescan is performed so that a preview image can be checked. Scanning From a Computer Application 169 Image size Shows the data size of the scan image. Rotation Select the orientation of the image to be scanned. If the Rotate back side check box is selected, the back side of the image is rotated 180 and scanned. (Applies only if ADF (Duplex) is selected) Close Click to close the TWAIN driver window. Prescan Click to begin scanning a preview image. [. . . ] When the CompactFlash card is correctly inserted, the button on the top side of the slot (circled in the illustration) slightly pops out. Before removing the CompactFlash card, press in this button. 8 9 10 11 Close the inside cover, and then tighten the screw. Reconnect the power cord, and turn on the machine. 12 312 Declare the Memory card in the Windows printer driver (Properties/Configure tab). CompactFlash Tray 3 (Lower Feeder Unit) You can install up to one optional lower feeder unit (Tray 3). The lower feeder unit increases your machine's media feed capacity by 500 sheets. Kit Contents Lower feeder unit with a tray (500-sheet capacity) Tray 3 (Lower Feeder Unit) 313 Installing Tray 3 Note Since consumables are installed in the machine, be sure to keep the machine level when moving it in order to prevent accidental spills. 1 Turn off the machine and disconnect the power cord and interface cables. 2 3 Prepare the lower feeder unit. [. . . ]