User manual KONICA MINOLTA MINOLTA NETWORK FOR PI6000

[. . . ] Software License Agreement and Warranty (i) For the U. S. and Canada Software License Agreement Important: Before installing the software please carefully read this License Agreement. The installation of this software indicates your acceptance of the terms and conditions of this License. If you do not agree with the terms and conditions, you should return the software to Minolta Corporation for a full refund. [. . . ] CAUTION: If you select an invalid subnet mask, you may not be able to access the Minolta Network device. Default Gateway If your local network is attached to other networks, you can specify the address of your default gateway. This gateway will be selected whenever messages need to be sent to another network. The gateway address must follow the format XXX. XXX. XXX. XXX, where each XXX is a number from 0 to 255. CAUTION: If you select an invalid default gateway or the default gateway becomes unavailable, the Minolta Network device may not be able to communicate with non-local networks. TCP/IP Chapter 4 4-22 Minolta Network Utility for TCP/IP Connection Timeout Checking This option allows you to enable connection timeout checking. This timeout is used to sever network TCP/IP connections that are idle for more than five minutes. Under most conditions, this option should remain enabled. NetWare and NetWare Port Configuration Options For specific information on NetWare or NetWare Port options, see Chapter 3, Novell NetWare, or select the HELP button on the bottom right of the screen. EtherTalk Configuration Options For specific information on EtherTalk options, see Chapter 6, Apple EtherTalk, or select the HELP button on the bottom right of the screen. Output Configuration Options To configure the Minolta Network device output, select the Output file tab. The following screen will display: Name Field Enter a descriptive name to identify the port. Configuration Page Language Select the appropriate printer language for printing configuration pages on your printer. 4-23 TCP/IP Chapter 4 Minolta Network Utility for TCP/IP SNMP Configuration Options SNMP options specify which information is necessary for an SNMP manager to access the Minolta Network device. The system variables are for user convenience and are optional. To configure SNMP specific information, select the SNMP file tab. The following screen will display: Chapter 4 NOTE: SNMP options need to be configured only if you are managing Minolta Network devices or getting system information using SNMP. Fill in the following information: System Name Enter the name of your choice. This name will identify the Minolta Network device in your SNMP-based management program. System Contact Enter any information useful to a user if problems with the Minolta Network device arise. System Location Enter a description of the Minolta Network device location. GET Community Name This field is used to set the community name required to "GET" information from the print server. The default community name is public. TCP/IP 4-24 Minolta Network Utility for TCP/IP NOTE: For JetAdmin to function correctly with the Minolta Network device, the SNMP Get Community Name must be set to public. SET Community Name This field sets the community name required to "SET" information on the Minolta Network device. Trap Community Name Enter the community name which will be used when traps are sent from the Minolta Network device. This setting allows trap utilities to only accept traps from devices with appropriate community names. Enabling/Disabling Protocols To enable or disable protocols on the Minolta Network device, select the Protocols file tab. [. . . ] Closing windows or quitting application programs on the Macintosh can make more memory available. Try again. Apple Ethertalk The change could not be verified. There is not enough memory to perform the requested action. Unexpected AppleTalk error. 5-12 Selecting Your Printer 1. Click on the Apple in the menu bar and select Chooser. [. . . ]