User manual KONICA MINOLTA PI3502 PS SCAN OPTION-GB

[. . . ] Pi 3502 PostScript/Scan Option Table of Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-1 Trademark Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-2 For Canada Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For setting of printer type, select "Postscript Printer". Other settings can to be left as default settings. 6 Select [Save & Exit] button to complete setting. 8-10 Pi3502 PS/Scan Option Linux ­ Installing the Printer Driver Open Linux 8 With Open Linux, printer setting can be performed using dialog box. The setting method using dialog box is given here. 1 Open KDE menu. Select [COAS] ­ [Peripherals] ­ [Printer]. The dialog box shown below will appear. 2 3 Select [Add] from [Printer] at the left top on the dialog box. "Select printer model" dialog box will appear. Select "Generic postscript printer. " Pi3502 PS/Scan Option 8-11 8 Linux ­ Installing the Printer Driver NOTE Í 4 Whenever network printer is to be used, select "Generic remote printer. " At this time, input "PORT1" for Remote Queue. "Printer name" dialog box will appear: Input optional name and click [OK] button. 5 "Printer attributes" dialog box will appear: Make certain that correct device is displayed here, but do not change any other items. 6 7 Select [OK] button. System will ask you whether to save changes, to create printer queue, etc. : Select [OK] button. Pi3502 PS/Scan Option 8-12 Linux ­ Installing the Printer Driver 8 8 Return to Printer Configuration dialog box. Once the added printer is displayed, select [OK] button to complete. Pi3502 PS/Scan Option 8-13 8 SuSE Linux Linux ­ Installing the Printer Driver With SuSE Linux, command should be executed from Terminal window to set printer. 1 Execute command shown below from Terminal window with current directory: # /var/lib/apsfilter/SETUP Terminal window will change as shown below after execution of command. 2 Screen will change as shown below by pressing the return key. Select [Entry] ­ [Device]. 8-14 Pi3502 PS/Scan Option Linux ­ Installing the Printer Driver 8 3 Printer interface setting screen will appear. Select [Parallel]. NOTE Í 4 When network is used, select [Remote] instead of [Parallel]. Input "PORT1" for printer queue. Make sure that Interface is set to parallel port. Pi3502 PS/Scan Option 8-15 8 5 Linux ­ Installing the Printer Driver Screen for specifying each setting will appear. Select [Postscript] for printer type. Screen will change to resolution setting screen, but it is not necessary to change from default value. 6 Specify printer name, paper and color. 8-16 Pi3502 PS/Scan Option Linux ­ Installing the Printer Driver 8 7 Select [Add] button for complete. Confirmation screen will appear. How to display Printer Utility dialog box If you use Xwindow, printer utility setting can be specified from dialog box. Dialog box can be displayed only with command operation, so "Didialog" command is used here. Input the following command on the Terminal window and execute: The dialog box will appear. # /opt/diutil/bin/didialog ­m [Model name] ­P [Printer name] ­a [Area] l l l Specify the printer name which was designated during setting. Input model name (di351/di251) for [Model name]. Specify "Area"; select "us" for Inch area, "ec" for Metric area. Refer to Chapter 9 for setting method concerning the printing. TIP Specifying "Model name" and "Area" is necessary only when didialog command is executed first. Pi3502 PS/Scan Option 8-17 8 8. 3 Use of commands dipjl command Linux ­ Installing the Printer Driver "dipjl" command is a printer setting command used for environment in which Xwindow cannot be used: Refer to "dipj1. 1" file in "/opt/diutil/man/ manl" for detailed description. To display "man" file, execute the following command: # man /opt/diutil/man/manl/dipj1. 1 NOTE If you are able to use Xwindow environment, this command is not necessary. Since the settings using this command are only temporary settings for printing, they cannot be saved. [. . . ] 2-1 Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4, 3-20 Output Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19 P Page Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]