User manual KONICA MINOLTA PI6000

[. . . ] 4499-7705-01 Printer Driver Pi6000 User's Manual for Microsoft Windows NT 4. 0 i CE Marking (Declaration of Conformity) We declare under our sole responsibility that the copier and options to which this declaration relates is in conformity with the specifications below. This declaration is valid for the area of the European Union (EU) only. Product Type Product Name Options Standards Printer Controller Pi6000 (with Copying Machine Di620/520) Post Script for Pi6000, RAM SIMM, Hard Disk Drive for Pi6000, Di620/520's options* safety*2 : EN 60 950 / 1992 (A1 : 1993, A2 : 1993, A3 : 1995, A4 : 1997) (Safety of information technology equipment, including electrical business equipment) EN 60825-1 (1994) <Di620/520 only> (Safety of laser products-Part 1: Equipment classification, requirements and users manual) *1 : EN 55 022 (Class B) / 1994 (A1 : 1995) EMC (Limits and method for measurement of radio disturbance characteristics of information technology equipment (ITE)) EN61000-3-2 / 1995 (Electromagnetic compatibility (EMC) - Part 3: Limits, Section 2: Limits for harmonic current emissions (equipment input current 16A per phase)) EN61000-3-3/ 1995 Electromagnetic compatibility (EMC) - Part 3: Limits, Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 16A. Notes : This device must be used with shielded interface cables. [. . . ] Property Window Tab [Paper] Chapter 2 [Page Layout] [Finishing] [Quality] Printing from Windows NT4. 0 [Device Option] Settings Number of copies, paper size, orientation, paper source, other basic print settings Duplex printing, 2-up printing, scaling, watermarks, other advanced print settings Collate, staple, hole punch, folding, other finishing settings Halftoning, print density, rasterizing, other graphics settings Settings for options installed on the Di620/520 Copy Machine, Finisher paper specification settings (specific to the region where the Di620/520 Copy Machine is purchased) For viewing driver version information, etc. Reference Pages 2-7 2-10 2-14 2-16 2-18 [About] 2-20 2-7 Paper Tab Paper Tab Use this tab to make basic print settings. 12 3 4 1 Paper Size 56 7 8 9 Use this list to select the paper size for printing. NOTE Select "Bypass (Manual Feed)" for "Paper Source" to print on a paper size that is not loaded in a tray of the Di620/520 Copy Machine. When the print operation starts, the Di620/520 outputs a message prompting you to manually feed paper into the printer or to load paper into the 2nd tray, and then goes into a standby mode. 2 Fit to Paper Check the "Output Paper Size" to adjust the print image to the paper specified under "Paper Size", or use the list box to specify a different paper size. The print image is automatically reduced or enlarged to fit on the size of paper you specify. Specify the number of copies you want to print. Click a button to specify the orientation of the printed output. The currently selected orientation is indicated by the icon to the left of the radio buttons and by the preview image on the left. Vertical orientation (top of print image is towards the short edge of the paper). Horizontal orientation (top of print image is towards the long edge of the paper). 3 Copies 4 Orientation Portrait: Landscape: Printing from Windows NT4. 0 Chapter 2 2-8 Paper Tab 12 3 Printing from Windows NT4. 0 Chapter 2 4 5 Paper Source 56 7 8 9 Use this setting to specify a Di620/520 Copy Machine paper tray as the source from which paper should be fed. Auto: Automatic selection of the paper tray that contains the paper specified by "Paper Size". Upper Tray: Prints on paper from the 1st tray 2nd Tray: Prints on paper from the 2nd tray. 3rd Tray: Prints on paper from the 3rd tray. Lower Tray: Prints on paper from the 4th tray. Bypass (Manual Feed): Prints on paper manually fed from the multi bypass tray. Large Capacity Cassette: Prints on paper from the large capacity cassette. 6 Different paper for 1st page When any setting other than Auto is selected for "Paper Source", you can check this option to specify a different paper source for the first page of the document. Select the paper source of the first page from the "1st Page" list. Leave this item unchecked if you want the first page to be the same as all the other pages. 7 1st Page This item is normally dimmed, unless the "Different paper for 1st page" option is checked. Use this list to select the paper source of the first page of the document. [. . . ] Use the Graphics dialog box that appears to adjust contrast and brightness. In the "Quality" tab, click the Detail of Quality button. Use the Graphics dialog box that appears to change the dither pattern setting. Some menu settings may be grayed out with certain applications. [. . . ]