User manual KONICA MINOLTA PI7500

[. . . ] 7664-4685-01 Printer Driver Pi7500 Operator's Manual for Microsoft Windows 95TM for Microsoft Windows 98TM for Microsoft Windows MeTM for Microsoft Windows 2000TM for Microsoft Windows NT 4. 0TM i Welcome Thank you for purchasing the controller. This Operator's Manual explains how to run print cycles on the machine to which the controller is connected. It also gives precautions that you should review before attempting to actually use the controller. So first read this manual carefully and thoroughly; then keep it close at hand so you can refer to it whenever it becomes necessary. [. . . ] Before pressing the [Save] button, be sure to set the contents of each property sheet. (1) 4668P049CA (1) Easy Set Name Add a name to the stored contents. Number of registrations : Depending on environment used, the number of registrations will be different. p. A-5 Number of characters : max 10 characters 3-6 4. "Setup" Property Sheet Functions of the "Setup" Property Sheet This property sheet allows you to set the paper take-up tray, paper exit tray and various high grade printing functions. (1) (4) Chapter 3 (2) (5) (3) Property Sheets 4014P004CA (1) N-up Outputs multiple originals on one sheet of paper. Available settings: Off, 2up, 4up, 6up, 9up, 16up · Border line : Sets the layout border · N-up Style : Sets the printing layout Horiz. "Setup" Property Sheet NOTES · If you print a document that contains pages of different sizes and/or different directions in the same job, the image may be partially cut or images may overlap each other. · This setting is not available if Custom Paper is used. TIP The printing layout is displayed on the Page Layout. (2) Watermark Prints a specific word in the background as a watermark. · Text : Select the word to be entered as the watermark from the list. Available settings: NONE, CONFIDENTIAL, COPY, DO NOT COPY, DRAFT, FINAL, PROOF, TOP SECRET, or a word set by the user · 1st Page Only : Select whether to insert a watermark on only the first page or on all pages. · Edit Watermark: Set the format, position, and so on, of the watermark characters. p. 3-10 NOTES · When using this function together with the cover page function, if you set printing to "None" with the cover page function and choose setting to print a watermark on only the first page, the watermark will be printed on the second page. · This function may not operate with some applications. · Depending on environment used, contents of Save/Delete will be different. p. A-6 Chapter 3 Property Sheets TIP A view of the watermark will be displayed on the Page Layout. 3-8 4. "Setup" Property Sheet Chapter 3 (3) Duplex / Booklet Specifies two-sided printing and Booklet printing. · Off : Not set · Short Edge Binding : Two-sided printing takes place so that the short edge is bound. · Long Edge Binding : Two-sided printing takes place so that the long edge is bound. · Booklet Left Binding : Four pages are printed on both sides of a single sheet of paper so that when the sheet is folded in the middle it forms a booklet (left bound). · Booklet Right Binding: Four pages are printed on both sides of a single sheet of paper so that when the sheet is folded in the middle it forms a booklet (right bound). NOTES · If you print a document that contains pages of different sizes and/or different directions in the same job, the image may be partially cut or images may overlap each other. · Two-sided printing and OHP interleaving cannot be set simultaneously. Property Sheets TIPS · The sizes for which you can perform two-sided printing are: Letter, Letter-R, Legal, A3, A4, A4-R, A5, JIS B4, JIS B5, JIS B5-R, Invoice, 11×17, and F4. [. . . ] Troubleshooting Symptom Possible Cause Action Check the setting of the paper size. Unable to specify the No exit port can be specified if the paper size exit port is A6 or Custom Size is specified. Paper is not fed from the specified paper source. Paper will not be fed from the specified paper source if that paper source is loaded with paper of a different size and direction. Watermark may not be printed in graphics applications. Load the paper source with paper of the appropriate size and in the appropriate direction. [. . . ]