User manual KONICA MINOLTA PSL SU-1

[. . . ] User Manual Di152f/Di183f PageScope Light www. minoltaeurope. com The essentials of imaging Foreword Welcome PageScope Light is a device control utility program provided by the HTTP server built into the Internet Fax & Network scan kit. This utility can be used with any standard Web browser, and the internet fax and network scanning functions can be set from a computer. Trademark Acknowledgements Minolta is a registered trademark of MINOLTA CO. , LTD. PageScope is a trademark of MINOLTA CO. , LTD. Ethernet is a registered trademark of Xerox Corporation. [. . . ] Reservation Report If multiple recipients are specified for transmission, such as with broadcast transmission and polling reception, check this option to print a report to show specified settings. TX Result Report Check this option to print the report showing the result of a transmission after the transmission is finished. RX Result Report Check this option to print the report showing the result of a reception after the reception is finished. Tray Lock section Put check marks for any trays that you do not want to use. Text Insert Header Print Check this option to add a message when sending scan data as e-mail attachments. Check this option to print the header information of "subject", "from", and "cc" when printing e-mails. 9 4 Description of Each Page 4. 3 Scanner Tab On the Scanner tab, settings for transmitting files created with the scanner of this Digital Copier can be specified. For details on specifying settings, refer to "5. 4 File Transmission Settings". 10 File Destination Setting No. Name Address delete button File Destination number Name of the File Destination. FTP Server address Click this button to delete the registered File Destination. 4 Description of Each Page 4. 4 Network tab Use the Network tab for configuring the network settings when using the internet fax and network scanning functions. Checking and setting can be performed with the Summary, TCP/IP Configuration, SMTP & POP3 Config. , FTP & DNS Config. , Reset, and Maintenance menus. Summary Use this to view a summery of the network interface. It lets you change the FTP and DNS server settings. FTP Proxy Server Address Enter the proxy server's IP address when a proxy is used to access FTP sites. Remote Port Number of Proxy Enter the proxy port number (1 through 65535). Enable DNS Server Check this option when domain name addressing is enabled. DNS Server Address Enter the DNS server's IP address when Enable DNS Server above is checked. Reset Use this menu to reset the network interface so new settings can take effect. Maintenance Use this menu to restore the network settings (only for the System tab and the Network tab) to its initial factory default settings. Click the Restore button. 13 5 Specifying Fax Settings 5 Specifying Fax Settings The fax function settings for one-touch dialing, speed dialing and group dialing, and the scanner function settings for file transmission with this Digital Copier can be specified from PageScope Light. The procedure for specifying these settings is described below. 5. 1 One-Touch Dial Settings From the One-Touch Dial Setting menu on the Fax tab, the one-touch dial settings available with this Digital Copier can be specified. With PageScope Light, only the fax number, e-mail address and group dialing can be set. Program dialing and combination dialing settings must be specified with the Digital Copier. No. Name Address One-touch dial number (01-27) Name of the recipient programmed for the one-touch dial number Address of the recipient programmed for the one-touch dial number Depending on the type of recipient specified, either a fax number or an e-mail address is displayed. 14 5 Specifying Fax Settings Batch delete button Click to delete the programmed one-touch dial settings. With one-touch dial settings programmed for batch transmission, the transmission time is displayed. 5. 1. 1 To program a new one-touch dial number A recipient can be programmed for a one-touch dial number that has not been programmed yet. Click the One-Touch Dial Setting menu on the Fax tab. Click a one-touch dial number (No. ) that has not yet been programmed with a recipient. [. . . ] With one-touch dial settings programmed for group dialing, "(Group Dial)" is displayed. Click to delete the one-touch dial setting programmed for group dialing. Specifying a new group dial setting From the list, click a one-touch dial number that has not yet been programmed. The Group Dial Destination screen appears. (For more details, refer to "5. 3. 1 Group dial recipient settings". ) 25 5 Specifying Fax Settings Changing a group dial setting Click a group dial number that has already been programmed. [. . . ]