User manual KONICA MINOLTA SCAN ELITE 5400

[. . . ] 9222-2890-11 AV-A304/ME200304 E HARDWARE MANUAL For proper and safe use Read and understand all warnings and cautions before using this product. WARNING · Use only within the voltage range specified on the unit. Inappropriate current may cause damage or injury through fire or electric shock. · Use only the specified AC adapter (Ya Hsin Industrial 019-240840) within the voltage range indicated on the adapter unit. An inappropriate adapter or current may cause damage or injury through fire or electric shock. [. . . ] Film type can be selected between color and black and white, positive and negative film. Slide film is positive film. Scanner resolution The maximum resolution for this scanner is 5400 dpi. The input resolution that can be entered in the DiMAGE Scan Utility is from 337 dpi to the maximum resolution of 5400 dpi. Scanner color profiles When the DiMAGE Scan Utility is installed, the scanner profiles listed below are automatically installed for this model scanner, see the software manual for location. These profiles have been included for advanced color matching with profile-to-profile conversions in sophisticated imageprocessing or DTP applications. When using these profiles, the color reproduced may not be the same as the color matching system in the utility software. See the color matching section in the DiMAGE Scan software manual for the profile location. MLTF5400. icc - used with positive film at any color depth other than 16-bit linear. MLTF5400p. icc - used with positive film with 16-bit linear color depth. 13 The Quick Scan button and DiMAGE Scan Launcher The Quick Scan button launches the DiMAGE Scan applications. When the button is pressed, the DiMAGE Scan launcher is displayed. Simply click on one of the launcher buttons to start the appropriate application. There should be no holder in the scanner. Quick Scan button When the Batch Scan Utility button is clicked, the scanner will initialize. When the set-holder message appears, insert the holder into the scanner; all the frames in the holder will be scanned and saved, and the holder will be ejected automatically. To scan another batch, change the film in the holder and reinsert it into the scanner. Click the Batch Scan Utility button to begin scanning. The scanner only needs to be initialized before the first holder is scanned. To change or confirm the Batch Scan settings, click the settings button. See the Batch Scan Utility section in the DiMAGE Scan software manual for details. The launcher can be used to directly open an image-processing application with which the scanner will be used. 2 3 1 To specify the application, click the view button (1); the open dialog box will be displayed. Locate and click on the application to highlight it. Click the open button (2) to complete the procedure; the name of the application will be displayed in the launcher (3). 14 Scanner notes The Quick Scan button can be used to launch a single application directly. Simply select the application from the drop-down menu at the bottom of the launcher; each time the Quick Scan button is pressed, that application will open along with the launcher. If the Batch Scan Utility is selected, the first time the Quick Scan button is pressed the scanner initializes and then the message to insert the holder is displayed. To scan subsequent holders, simply insert the holder and press the Quick Scan button. Pixel Polish system requirements The computer must meet the system requirements below to use Pixel Polish. [. . . ] The door must be closed for the scanner to initialize. If the door does not close automatically, it can be closed manually with the supplied reset tool. Insert the tool into the hole on the side of the scanner until the latch releases the door. The reset tool can be stored in a special clip on the front feet on the bottom of the scanner unit. [. . . ]