User manual KONICA MINOLTA SCAN ELITE II HARDWARE

[. . . ] E HARDWARE MANUAL 9222-2888-11 AV-A207 FOR PROPER AND SAFE USE Read and understand all warnings and cautions before using this product. WARNING · Use only within the voltage range specified on the unit. Inappropriate current may cause damage or injury through fire or electric shock. · Use only the specified AC adapter (Delta Electronics ADP-20LB REV:B) within the voltage range indicated on the adapter unit. An inappropriate adapter or current may cause damage or injury through fire or electric shock. [. . . ] Hold the holder straight and level when inserting it into the scanner. 2 1 3 Carefully push the holder into the scanner until the arrow mark (1) is aligned with the scanner door; the holder will be automatically fed into the scanner from that point. Never touch or hinder the holder when it is in the scanner. 2 11 LOADING THE FILM HOLDERS Using the APS Adapter AD-10 (sold separately) APS (Advanced Photo System) cassette film can be scanned using the APS Adapter AD-10. The cassette must contain processed film; the square number 4 mark at the end of the cassette should be highlighted in white. Do not load unprocessed film. 1 To load an APS cassette, slide the film-chamber release (1) toward the top of the adapter unit until the chamber door opens (2). The film-chamber release will not return to its original position until the door is closed. 2 Scanner contacts (Keep clean) 4 Insert the cassette into the film chamber as shown (3). Close the chamber door (4); the film-chamber release will return to its original position (5). 3 5 When the indicator lamp glows steadily, open the front door until the top of the door is aligned with the APS film-holder mark. With the scanner contacts face up, insert the adapter into the scanner until it stops. The scanner detects the holder and automatically loads the film. Do not remove the holder until the film has been rewound, see page 13. When using the APS adapter, if the scanner makes a strange sound or the film-advance warning appears, eject the APS adapter immediately (p. Contact a Minolta service facility. 12 Film format and type settings When scanning, the film type and format must be selected in the main window of the DiMAGE Scan Utility. This scanner does not use glass holders and so the holder-type drop-down menu is deselected. See scanner setup in the basic-scanning section of the software manual. Two film formats can be selected with this scanner: 35 mm and APS. The APS option is for use with cassette film with the optional APS adapter AD-10. If scanning APS film in slide mounts, use the 35 mm film-format option. Film type can be selected between color and black and white, positive and negative film. APS has an additional option: auto-detect. Auto detect automatically sets the film type between color and black and white, and positive and negative. When making an index scan with the optional APS holder, the thumbnail frame numbers correspond to the film frame numbers. Ejecting a film holder Use the eject button on the scanner body or in the DiMAGE Scan Utility window to remove the holder; the scanner automatically ejects the holder to its initial insertion position. Do not touch or hinder the holder while it is moving. When using the optional APS Adapter, the scanner automatically rewinds the film when the eject button is pressed. Do not remove the adapter until the rewind motor has stopped. Eject button Close the front door when the scanner is not in use. 13 SCANNER NOTES Adobe Photoshop Elements Take time to register your copy of Photoshop Elements with Adobe. [. . . ] Clicking the yes button will remove the driver from the system. Windows 98 and Me: 7. Install the DiMAGE Scan Utility software; refer to the software manual. Turn off the computer and reconnect the scanner. 21 TROUBLESHOOTING Technical support Please contact your dealer for information regarding installation, USB or IEEE 1394 interface recommendations, or application compatibility. If your dealer is unable to help you, contact an authorized Minolta service facility. [. . . ]