User manual KONICA MINOLTA SCANNER RX-1

[. . . ] Carrier type You can use the following three carriers. When changing the carrier, close the Scan Setup tab or user interface first. The carrier determines the film type and focusing you can use. Carrier Film Type Focusing Sleeve Color negative film Normal Black-and-white negative film Normal Positive film Normal Lock Slide Black-and-white negative film Normal Positive film Normal Search Lock Color negative film Normal APS Black-and-white negative film Normal Positive film Normal Lock RX1 User Interface - 3 - KONICA FILM SCANNER RX-1 4 Cropping Cropping is changing the number of pixels the RX1 sends. [. . . ] The offset value or how much they were shifted appears at the right extremity of the screen. Frame count Displays the total number of frames acquired during a prescan. Scroll bar Because the screen displays a maximum of six frames, use the scroll bar to display the remaining frames when the frame count is more than 7. Operate the scroll bar as you do in a Window. RX1 User Interface - 7 - KONICA FILM SCANNER RX-1 8 Right mouse button clicking Selecting a frame and clicking the right mouse button on it display the dropdown menu which offers the following functions. DX code Displays decoded DX code information. The information includes the film type and vendor name, but only the vendor name appears in some cases, depending on film. With film not yet registered, the DX code appears as coded numbers. Caution: If the RX1 cannot recognize a DX code due to incorrectly loaded film, etc. , a RX1 User Interface - 8 - KONICA FILM SCANNER RX-1 9 dialog box appears, with the following three buttons inside. Retry : The film needs to be reloaded and a second prescan to be executed. Cancel : Cancels the prescan (same as a retry in effect). Ignore : Ignores the DX code and switches to the Rotate/Mirror tab. When you are done with the operations on the Rotate/Mirror tab, click the on-screen tab to move to the next tab. RX1 User Interface - 9 - KONICA FILM SCANNER RX-1 10 3. Enhance tab This tab lets you adjust the colors of the image you are scanning. Buttons Color Adjustment button Clicking the button displays the Color Adjustment dialog box. When only one frame is selected, its exploded image appears in the dialog box. The number of pixels displayed is as follows. · When using the sleeve carrier : 384 x 256 (landscape)/256 x 384 (portrait). · When using the slide carrier : 384 x 256 (landscape)/256 x 384 (portrait). · When using the APS carrier : 384 x 216 (landscape)/216 x 384 (portrait). When multiple frames are selected, no images appear in the dialog box. Reset Selected button Clicking the button undoes the adjustment applied immediately before in the Color Adjustment dialog box. When clicked, the displayed button name changes to Restore Selected. RX1 User Interface - 10 - KONICA FILM SCANNER RX-1 11 Clicking the Restore Selected button restores the adjustment undone. [. . . ] To mark a check box, click the frame or check box. On entering the Scan tab, you will find that the frames adjusted on the Rotate/Mirror tab or in the Color Adjustment box are marked. Buttons Transfer button Clicking the button scans the marked frames and displays them as undefined images in the host application. RX1 User Interface - 14 - KONICA FILM SCANNER RX-1 15 When the plug-in is driving the RX1, it lets you use these images. Save button Places the images in the Save dialog box. Deselect All button Removes the marks from all frames. RX1 User Interface - 15 - KONICA FILM SCANNER RX-1 16 Save dialog box Displays only the marked frames. [. . . ]