User manual KONICA MINOLTA SD-501

[. . . ] bizhub PRO 1050/ bizhub PRO 1050P Additional Information - SD-501 Saddle Stitcher SD-501 Saddle Stitcher is an optional device newly added to the configuration of bizhub PRO 1050 / bizhub PRO 1050P options. Some screens of bizhub PRO 1050P appear partially different from those of bizhub PRO 1050, however, setting procedure is just the same. Please refer to this guide for the operation and safety information on the saddle stitcher, and keep this guide inside the user's guide of the main body, readily available for reference. Also, be sure to read Section 1: Safety Information of the bizhub PRO 1050 / bizhub PRO 1050P User's Guide - Main Body. Contents Section 1: Machine Information Installation Space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The image display on the screen allows you to view the shift direction and amount to be created on the printed sheets. 2-4 Adjusting Position of Copy Image (Image Shift) (continued) When Booklet or 2 Repeat mode of Repeat has been already selected, the Creep Adj. or Page Space key appears clear on the screen to show its availability. to make space between left and right pages of a booklet. Or, touch Page Space to highlight it, then enter the desired amount of the space between the two repeated images using the touch panel keypad or up/down arrow key. 5. The Application popup menu will be restored. The Copy Screen will be restored. DETAILS: Creep Adj. Booklet A B A Page space B Original 2 Repeat in Repeat Page space Original 2-5 Selecting an Output Tray This section describes how to select an output tray of the saddle stitcher. To select an output tray of any other optional equipment, see p. 12-6 of User's Guide (Copier). 1. Touch Output Application on the Copy Screen. The Output Application Screen appears. Trays that can output paper will be have keys on the front image of the machine, and the tray that is currently set to output paper is shown with a depressed key. 2. Touch Output Tray. An Output Tray Selection Screen reflecting the combination of optional devices will appear. 3. Select the desired output tray. Touch the desired tray position key [=] to select it. 2-6 Selecting an Output Tray (continued) 4. 6. Touch OK on the Output Tray Selection Screen. It will return to the Output Application Screen. The output tray location is indicated by a depressed key on the front image of the machine. Touch OK on the Output Application Screen. Be sure to fully withdraw the Saddle stitcher tray, if selected as an output tray. Be careful not to exceed the tray capacity when selecting the print quantity, otherwise unexpected trouble may be caused. 2-7 Making Folded Booklet (Fold&Staple / Trimming) Use Fold & Staple mode in combination with Booklet feature to make two-sided signature booklet, folded and stapled at two positions (saddle stitched) in the center. Use Trimming mode to trim the edge that opens the booklet, if desired. Specifications for Fold&Staple / Trimming Paper weight: 13 ~ 43 lb, 60 ~ 91 lb (cover) Paper size: 12x18, 11x17, 8. 5x14, 8. 5x11R, A3, B4, A4R, B5R, F4, 8K, 16KR, Wide size paper (max. number of folded & stapled sheets: Varies according to the paper weight to be used. Saddle stitcher tray capacity: Varies according to the number of folded & stapled sheets. Staple position: Variable (90 ~ 165 mm) Stapling method: Inline clinch Trimming width: 2 ~ 10 mm Fold & Staple Fold & Staple and Trimming 1. Touch Output Application on the Copy Screen. The Output Application Screen appears. 2-8 Making Folded Booklet (Fold&Staple / Trimming) (continued) 2. Touch Fold&Staple, then select to use Trimming or not. [. . . ] 13 Touch Return to restore the Saddle Stitcher Adjustment Mode Menu Screen. 3-12 05 Saddle Stitcher Adjustment (continued) 06 Fold Paper Width Adjustment Perform this adjustment if folding position processed by the SD-501 Saddle Stitcher dislocates in the folded set. Procedure 1 Touch Adjustment - 02 Finisher Adjustment - 05 Saddle Stitcher Adj. 2 Touch 06 Fold Paper Width Adjustment to display the Fold Paper Width Adjustment Screen. 3 Touch the COPY tab to display the Copy Screen. 4 Load the desired size of paper to be adjusted on a tray, specify the number of sheets to 5, then press [Start]. [. . . ]