User manual KONICA MINOLTA SR-T 200

[. . . ] LASER SAFETY LABEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LASER CAUTION LABEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT . . . . . . . . . . . . . . . SERVICE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Holding down the key for 3 seconds or more will set the copies into the Utility mode. Press to reset the number of copies to "1". · Press to stop a scanning sequence. · · · · Press to start a scanning sequence. Press to validate the setting just made. The key lights up green when the copier is ready to make copies, orange when it is not ready to make copies. JOB STORE COUNTER REVERSE IMAGE ORIGINAL COMBINATION MARGINE ERASE OUTPUT IMAGE SHIFT 10 X/Y ZOOM 11 JOB RECALL 12 BYPASS TRAY SIZE SELECT 13 ZOOM 14 DISPLAY 15 KEYPAD 16 ID 17 POWER SAVE 18 INTERRUPT 19 AUTO RESET 20 CLEAR 21 STOP 22 START S-2 No. 23 ENTER 24 RE Name Description Press to validate the setting just made. Press to select a zoom ratio from among those fixed ratio available as standard. Press to select either Auto Paper or Auto Size. Press to adjust the image density of the copy. 25 APS/AMS 26 SIZE 27 DENSITY SET S-3 2. 2-1. UTILITY MODE Settings in the Utility Mode Code No. U-1 U-2 U-3 U-4 U-5 Description User's Choice Mode Drum Dehumidify Mode Toner Replenisher Mode Custom Size Input Mode Administrator Mode · Utility Mode is used to make various settings according to the user's need. 2-2. Utility Mode Setting Procedure <Procedure> 1. C-5 Setting Description 0 Lighter 1 Normal 2 Darker <Density Level (Manual)> Select the priority exposure level in the Manual Exposure mode. C-6 Setting Description 1 Step 1 Lighter 2 Step 2 3 Step 3 4 Step 4 5 Step 5 Darker <Output Priority> Select the priority finishing type. C-7 Setting Description 0 Non-Sort 1 Sort 2 Group <Crisscross Mode> Select whether to enable or disable crisscross sorting automatically C-8 Setting Description 0 Enabled 1 Disabled <4in1 Copy Order> Specify the default copying order in the 4in1 mode. Setting C-9 Description 1 3 2 4 1 2 3 4 0 1 C10 <Book Binding Position> Select whether to the copier scan the left-hand-side page (Leftbound) or the right-hand-side page (Right-bound) first when it scans an open book. Setting Description 0 Left-bound 1 Right-bound S-6 Code No. Setting (The default is Highlighted ). <Margin Setting> Adjust the margin width for the File Margin copy. C11 Setting 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . . . . . . . . . . . . 20 20 Description (mm) 0 <Erase Setting (Left)> Adjust the erase width for the Left Erase copy. C12 Setting 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . . . . . . . . . . . . 20 20 Description (mm) 5 <Erase Setting (Upper)> Adjust the erase width for the Upper Erase copy. C13 Setting 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . . . . . . . . . . . . 20 20 Description (mm) 5 <Erase Setting (Frame)> Adjust the erase width for the Frame Erase copy. [. . . ] · Secure in position. 5 6 Input system 1 2 3 YES · Clean or change. YES · Remove foreign matter or reinstall belt. YES · Remove foreign matter or change. YES · Re-wind Scanner Drive Cables. [. . . ]