User manual KONICA MINOLTA VECTIS 25

[. . . ] This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] When the built-in flash is down, or an attached accessory flash is off, the flash will not fire. If 125 blinks in the data panel, the light level is too bright for the selected aperture. Turn the control dial until the blinking stops. In S mode, you select the shutter speed and the camera automatically sets the aperture required for proper exposure. This mode is useful when you want to control subject blur. The size of the aperture (lens opening) determines the depthof-field in the final image as well as the intensity of the light falling on the film. Depth-of-field is the area in front of and behind the point where the lens is focused which will appear sharp. Large apertures (small numbers) limit the depth-of-field to a narrow range in front of and behind the point of focus. A narrow depth-of-field is used when you want to place greater visual emphasis on your main subject by blurring the background, as in the case of portraits. Small apertures (large numbers) provide greater depth-of-field, bringing an increasingly greater range into focus. A large depth-of-field is important when you are photographing landscapes to ensure the entire scene will be sharp. Your camera records date, time, and title information on the film's magnetic data strip. The recorded information is read at the photo lab and imprinted on the back of your photographs. Some labs can not print date and/or time information on the front of your photographs. This camera always records date and time information on the film's magnetic data strip. See your photofinisher for details on having date and time information imprinted onto prints made from the slides. If someone walked into the picture at the last moment, or you don't need prints, you can set the print quantity to zero after taking the picture. Zero the print quantity before taking the next picture. Open the control-panel door, then press and hold the print button until the quantity displayed changes to a blinking zero. The camera will wind the film back to rewrite the data, then readvance the film to the next frame. Once selected, this quantity is not changeable until reprints are ordered. The exposed frame itself remains on the film and can be printed when ordering reprints. [. . . ] feature availability will increase as the system moves forward and processing equipment is updated or modified. The Vectis S-1 is already equipped with a number of these functions. We recommend you ask your photofinisher for a list of available services when having your Advanced Photo System film developed. 5 mm Dimensions: ø59 x 52 mm Weight: 115 g The specifcations are based on the latest information available at the time of printing and are subject to change without notice. [. . . ]