User manual KONICA MINOLTA X-700

[. . . ] Minolta's third party suppliers may protect their rights in the event of any violation of these terms. The License permits you to: 1. Use this software in the conduct of business without limit when the software is used with the intended Minolta Product. SOFTWARE: You may install and use the SOFTWARE on a computer to which the Minolta Printer is attached. OR NETWORK: If the software is installed on a computer acting as a network server, any number of computers or workstations may access or utilize the printer services of that server. The printer services are described in the printed materials accompanying the Printer Network Card. i Foreword The following are not permitted: 1. [. . . ] Choose Object ¡ Create ¡ NDPS Printer. This causes the Create NDPS Printer dialog box to appear. Type a name in the Printer Name field. Procedure 4-30 4-4 Configuring NetWare Enterprise Print Services (NDPS) 4. In the Printer Agent Source field, select Public Access Printer. When the Select Public Access Printers list appears, click Create. 6. 8. A warning message appears saying that all clients will need to reinstall this printer after it is converted. Select the public-access printer you want to convert to a controlled-access printer and click OK. Click Create. Note · Novell NetWare Client 4. 7 for Windows NT displays a transport error when you try to add an NDPS Manager or an Agent using Netware Admin. This problem does not exist with Client 4. 6 for Windows NT. 4-4-6 Adding NDPS Printers from Windows Clients Once an NDPS printer had been created, you can add it to the available printer resources of Windows clients as follows. To add a printer from a Windows NT 4. x workstation 1. Choose Start ¡ Settings ¡ Printers. Select Network Print Server and click Next. The actual port is always one higher than the base port number. The status page shows the actual port number. With both the host-based and printer-based lpd, you must assign IP parameters to the Network Card. See Chapter 7 - Setting Up IP Parameters for more information. 6-1 Printer-based lpd Configuration lpd/lpr is an implementation of the standard UNIX line printer daemon. It lets you print across a TCP/IP network without needing to install software on your workstation. All filtering and banners are done by the Network Card. Remote printing uses the same commands (lpr, lpq, lpc) as local printing. An lpr request from a workstation references the remote (rm) entry in the /etc/printcap file, where it finds the printer on a remote system. lpr opens a connection with the network lpd/lpr process on the remote system, and sends the data file to the remote printer. The printer-based lpd then filters the data and prints the job in accordance with information contained in the control file and its own printcap file. The Network Card lpd recognizes the format of certain printer emulations and filters the data, if possible, so it can be printed on the printer type you specify. Either of the following two methods can be used to inform the Network Card lpd of what type of printer is connected. [. . . ] On the Network dialog box, click the Close button to complete the configuration procedure. In response to the dialog box that appears asking whether you want to restart Windows, click OK to restart. A-3-2 Installing and Setting Up the Microsoft TCP/IP Printing Service 1. On the Start menu, point to Settings and then click Control Panel. On the Network dialog box, display the Services tab and then click the Add button. [. . . ]