User manual KONICA MINOLTA ZK2EV1

[. . . ] Knob can be turned to ease removal of mishandled paper. Handle can be withdrawn to allow removal of mishandled paper. Left lever opens to allow removal of mishandled paper. [. . . ] 2. Touch OUTPUT MENU on the Basic Screen The Output Mode popup menu will be displayed. Touch MAIN TRAY, if not highlighted. 3. Touch PUNCH. The Punch Position popup menu will be displayed. 4. 7. Touch the desired punch position key on the screen to highlight it. Touch OK on the Punch Position popup menu to restore the Output Mode popup menu. Touch OK on the Output Mode popup menu to complete the setting and return to the Basic Screen. The selection made in punch position will be displayed in the OUTPUT icon area. Specify the original set direction. Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original popup menu. Touch to select the desired original set direction, then touch OK to return to the Basic Screen. 8 Operation of the Z-Fold Kit (continued) 8. Select additional copying features, as required. Enter the desired print quantity from the control panel keypad. Position originals in the document handler. HINT See p. 3-4 of the main body Instruction Manual for details on positioning originals. 11. Press [Start]. CAUTION When the finisher exit tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. 9 Operation of the Z-Fold Kit (continued) Output Z-Folded Copies (Z-Fold) The Z-Fold mode is available only when Z-Fold kit option is installed on the FN-112/FN6 Finisher. When the Z-Fold mode is selected in combination with any of the Primary (main) tray output modes, the original image is copied on A3/B4 copy paper and output to the Primary (main) tray of the Finisher according to the selected output mode. >>>Specifications for Z-Fold mode<<< Folding type: Z-folding Copy paper size: A3, B4 (60 ~ 90 g/m2 paper) All other paper sizes will be output without Z-fold or double-fold. Folded width*: 209 mm or less for A3 181 mm or less for B4 When using Mixed Original mode with Z-Fold mode, A3 and B4 originals should not be mixed, otherwise the Z-Fold mode may not function properly. Special paper type (Thick 2, transparent films, labels, tabbed sheets) and nonstandard size (STD size (special), Non STD size, Wide paper) cannot be Z-folded. Using special paper will cause the machine trouble. Some plain paper types may cause folded line to shift in Z-Fold mode. When using Z-fold, Staple-sort and APS for mixed size originals, heed the limits on capacity described on p. [. . . ] Touching RETURN restores the Finisher Adjustment Menu Screen. 4 Touch RETURN to restore the Key Operator Mode Screen. 5 If no further changes are required, touch RETURN to restore the Basic Screen to perform copying operations. 15 Copyright 2002 MINOLTA CO. , LTD. [. . . ]