User manual KONICA 7155

[. . . ] MANUEL UTILISATEUR M 7155/7165 Basic Advanced Contents Contents Features of the Konica 7155/7165 Basic Safety Information 1 Section 1: Safety Information Caution Labels and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Requirements for Safe Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Initially, the tandem mode will be released automatically if Auto reset is activated on the primary copier. Key operator can set the primary copier to select the tandem mode as initial setting. Apply this setting to the primary copier only, if desired. Setting on both copiers will deactivate the tandem mode. 7-23 Weekly Timer Rotation Vertical/Horizontal Zoom Fold / Stitch&Fold Punch Three-Fold Cover Sheet Feeding Using Finisher Manually Tandem Mode Advanced Information 7 7155e07v1. fm 24 Using Two Copiers in Tandem (continued) The 7155/7165 is provided with an Allocation recovery mode, which functions when trouble occurs in either the primary or secondary copier to allow the trouble-free copier to complete the job. When the two copiers in tandem mode have the same EKC password registered, copying will be available by entering the EKC password in the primary copier only. The password will be transmitted to the secondary copier. Interrupt copying is available only on the copier with [INTERRUPT] pressed. If the primary copier is installed with HDD, the image data stored in HDD can be output in tandem mode copying. Corresponding tray sizes on the primary and secondary copiers should be the same when using multiple trays for a single job. Incompatible Conditions: Rotation Sort, Rotation Group, Group, Rotation, OHP Interleave, SET NUMBERING and WATERMARK NUMBERING in Stamp 1. 3. Turn power on by pressing the Power switches of the two copiers. Confirm that both copiers are ready to copy with the Basic Screen displayed. Touch OUTPUT MENU on the Basic Screen of either copier. The Output Mode popup menu will be displayed. Touch TANDEM to highlight it, then touch OK. The copier with TANDEM highlighted will become the primary copier; the other copier will function as the secondary copier. The Master icon displays on the Basic Screen of the primary copier to indicate that the two units are ready to work in tandem mode. 7-24 Using Two Copiers in Tandem (continued) FOR DETAILS The Sub icon will display on the Basic Screen of the secondary copier when [START] is pressed on the primary copier to start the tandem printing operation. Weekly Timer Rotation Vertical/Horizontal Zoom Fold / Stitch&Fold Punch FOR DETAILS The tandem mode cannot be selected/continued in the cases shown below. The message "Please wait/ Reserve is not available in Sub machine, " "Sub machine error/ Please check sub machine, " or "Please check sub machine" will be displayed, as required. · The tandem mode cannot be selected while the secondary copier is in the off state, due to Auto shut-off. Press [POWER SAVER ON/OFF] to release it. · Selected tandem mode will be released automatically when the secondary copier activates Auto shut-off. Press [POWER SAVER ON/ OFF] to release it, then select the tandem mode again to restart the procedure. · When any problem occurs in the secondary copier, such as a paper misfeed or lack of paper, the secondary copier will be unavailable for printing; however, the problem will not cause tandem mode to be released. Take the appropriate troubleshooting measures to be ready for copying. · Tandem printing job cannot be started if 5 reserve jobs (not in tandem mode) are entered on the secondary copier. Wait until the reserve jobs are completed on the secondary copier. [. . . ] Touch E-Mail, HDD, or FTP to display the registered name keys on each page. 3 Select the name key to be changed or deleted. Touch the d Lower arrow key to scroll, or c Upper arrow key to return. 13-52 [19] Scan Transmission Setting (continued) To delete the address: Touch to highlight the desired name key, then touch DELETE. The selected key will be deleted from the screen. [. . . ]