User manual KONICA CM-S100W

[. . . ] Ver. 1. 8 E Instruction Manual Es Manual de instrucciones Formal designations of application software used in this manual (Designation in this manual) (Formal designation) Windows, Windows 2000 Microsoft® Windows® 2000 Professional Operating System Windows, Windows XP Windows, Windows Vista Microsoft® Windows® XP Professional Operating System Microsoft® Windows® Vista Business Operating System Trademarks · "Microsoft", "Windows", "Windows 2000", "Windows XP" and "Windows Vista" are registered trademarks of Microsoft Corporation in the U. S. A. · "Intel" and "Pentium" are registered trademarks of Intel Corporation in the U. S. A. Other company names and product names mentioned in this manual are the registered trademarks or trademarks of their respective companies. Notes on this manual · No part of this manual may be reprinted or reproduced in any form or by any means without the permission of Konica Minolta Sensing, Inc. · The contents of this manual are subject to change without notice. [. . . ] When the file in SpectraMagic Ver. 3. 6 format (. wsv) is opened The file converted into mes is created in the folder of the selected original wsv file with the same file name. When a wsv file with the same name already exists in the folder, a tilde is prefixed to the name of the converted file. The number of tildes is not limited as long as files of the same name exist. E131 Other Functions CHAPTER 2 : OPERATION GUIDE When the file in SpectraMagic Ver. 3. 3 format (. mdb) is opened One mdb file can record two or more records. After the conversion, mes files are created by the number of records in the file. In the folder of the original mdb file, a new folder with the same name as the original mdb file is created, and the files converted into mes are created in the new folder. The name of the mes files are the same as each record name for reflectance data and are in the form of "record name (Tra)" for transmittance data. If, however, characters not allowed to be used in a file name in Windows (/, :, etc. ) are included in the original record name, such characters are omitted from the file name. When a mdb file with the same name already exists in the folder, a tilde is prefixed to the name of the converted file. The number of tildes is not limited as long as files of the same name exist. An mdb file can store up to 200 characters for a comment, but an mes file can only store up to 80 characters. Consequently, the 81st and following characters will be deleted after the conversion. After two or more mes files are created, the Open dialog box appears. When a data file of 6 banks is opened When the CM-3600d or CM-2600d is used for measurement, SpectraMagic Ver. 3. 6 and SpectraMagic Ver. 3. 3 can create a file with data of 6 bank statuses (SCI/100%, SCI/0%, SCI/adjust, SCE/100%, SCE/ 0%, and SCE/adjust). Since the SpectraMagic NX can create a data file with a maximum of 3 banks, when a file with 6 banks is converted into an mes file, the target or sample data is divided into 3 pieces of data. Consequently, there will be 3 types of 2-bank data such as SCI+SCE/100%, SCI+SCE/0%, and SCI+SCE/adjust. Each type of data is named "Target data name_100%", "Target data name_0%", "Target data name_adj", "Sample data name_100%", "Sample data name_0%", and "Sample data name_adj". Maximum number of data pieces for a created SpectraMagic NX file (. mes) Since an mes file is created by converting all data recorded in the original data file (wsv or mdb), it may contain more than 5, 000 pieces of data. However, the SpectraMagic NX can record up to 5, 000 pieces of data. Consequently, when a file with more than 5, 000 pieces of data is opened with the SpectraMagic NX, all data can be displayed on the screen, but the data from a new measurement cannot be added. When the data file created with ChromaMagic is opened When the data file created with ChromaMagic (. mdb) is selected and the Open button is clicked, the file is converted into a data file in SpectraMagic NX format (. mes), and the converted file opens. One mdb file can record the data of several illuminants. If a file contains such data, a new file is created for each illuminant. [. . . ] 59, 61 Template File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119, 120 Template Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Tertiary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 Text data file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Tile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Tint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38, 39, 40 Tolerance for Each Target . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 E267 S Sample automatic averaging measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81, 86 Sample Data to upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Sample manual averaging measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81, 87 Sample Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Sample remote measurement . . . . . . . . . . . . . . . . . . 81, 83 Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 118 Save as Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]