User manual KONICA CR-310

[. . . ] The instruction must be strictly adhered to. Disconnect the AC power cord from the AC outlet. Denotes a sentence regarding safety precaution for laser. Read the sentence carefully to ensure safe and correct use. [. . . ] · Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus meets all requirements of the Canadian (ICES-003). Cet appareil numérique de la classe B est conforme â la norme NMB-003 du Canada. The VIVID 300 is a class I instrument specified in IEC Publication 60825-1:1993/Amd. 1:1997. Use it according to the instructions given in this manual. CARE AND STORAGE The VIVID 300 should be stored in areas with temperatures of between -20 and +50°C. Do not store it in areas subject to high temperature or high humidity or where sudden changes in temperature or condensation are likely to occur. We recommend storing the VIVID 300 at a relatively constant temperature with a desiccant (silica gel etc. ). Do not leave the VIVID 300 inside a closed car or in the trunk of a car. Under direct sunlight, the increase in temperature can be extreme and may result in malfunctions. q If the VIVID 300 needs cleaning, wipe with a soft dry cloth. Never use solvents such as thinner or benzene. Do not stare into this window. Output Terminal for External Monitor SCSI Port Power Switch DIP Switch (ID Selector) AC Power Connector Tripod Socket 6 CONNECTING THE AC POWER CORD WARNING Always use the AC power cord supplied as a standard accessory with the VIVID 300, and connect it to an AC outlet (100-240 V~, 50-60 Hz). Failure to do so may damage the VIVID 300, causing a fire or electric shock. Do not bend, twist or pull the AC power cord excessively. Do not place heavy items on the AC power cord, or damage or modify it in any way. Doing so may cause damage to the AC power cord, resulting in fire or electric shock. If the VIVID 300 will not be used for a long time, disconnect the AC power cord from the AC outlet. Accumulated dirt or water on the prongs of the AC power cord's plug may cause a fire. Any dirt or water on the prongs of the AC power cord's plug must be removed. When disconnecting the AC power cord's plug, always hold the plug and pull it to remove it. Doing so may damage the AC power cord, causing a fire or electric shock. Do not insert or disconnect the AC power cord's plug with wet hands. [. . . ] Failure to do so may result in malfunction. Turning Power OFF 1. Set the POWER switch of the host computer to OFF. Set the POWER switch to OFF " ". x The power will be turned off. 11 CONNECTING AN EXTERNAL MONITOR To connect an external monitor to the VIVID 300, use a suitable co-axial cable (the cable must have a BNC terminal (75 ) on the end which is to be connected to the VIVID 300). [. . . ]