User manual KONICA CS-S10W V1.3

[. . . ] Data Management Software CS-S10w Standard Ver. 1. 3 Instruction Manual Formal designations of application software used in this manual (Designation in this manual) (Formal designation) Windows, Windows 2000 Microsoft Windows 2000 Professional Operating System Windows, Windows XP Windows, Windows Vista Microsoft Windows XP Professional Operating System Microsoft Windows Vista Business Operating System Trademarks · "Microsoft", "Windows", "Windows 2000", "Windows XP" and "Windows Vista" are registered trademarks of Microsoft Corporation in the U. S. A. · "Intel" and "Pentium" are registered trademarks of Intel Corporation in the U. S. A. Other company names and product names mentioned in this manual are the registered trademarks or trademarks of their respective companies. Notes on this manual · No part of this manual may be reprinted or reproduced in any form or by any means without the permission of Konica Minolta Sensing, Inc. · The contents of this manual are subject to change without notice. [. . . ] Up to 64 and 256 alphanumeric characters can be used for a name and a comment, respectively. The data is added to the list window. Specifying Target Data/ Tolerance Input Colorimetric Target dialog box Color Space Specify the color space used for manual input. The available color spaces are XYZ, Lvxy and Lvu'v' for the light-source color mode, and XYZ, L*a*b* and Lab (Hunter) for the object color mode. Input Data Enter the colorimetric data you selected. 53 CHAPTER 2 : OPERATION GUIDE 2. 5. 1-c Uploading Target Data from the Instrument This procedure is available only when the instrument is connected. The target data stored in the memory of the instrument can be uploaded to the CS-S10w software. This procedure is enabled only when Normal Mode under Light-source Color is selected. Select Instrument - Upload/Download - Upload Target from the menu bar. Specifying Target Data/ Tolerance 2. The Target Data to upload dialog box appears. Data with a check mark will be uploaded. Note that the data cannot be displayed when the observer setting is different from the value currently specified with the CS-S10w software. 54 CHAPTER 2 : OPERATION GUIDE 3. Click the OK button to begin uploading. Target Data to upload dialog box Specifying Target Data/ Tolerance Select All All sample data check boxes are selected. Clear All All sample data check boxes are cleared. 2. 5. 1-d Copying Target from the Existing Data For data copy and paste procedures, see page 65. You can copy sample or target data in the same or different document file and use it as target data. 55 CHAPTER 2 : OPERATION GUIDE 2. 5. 2 Specifying the Target Data Specify the target data used for color difference measurement from the target data stored in the document file. When only absolute values are measured, it is not necessary to specify target data. 2. 5. 2-a Creating a Folder containing a Target 1. Select Data - Create Folder from the menu bar. The Folder Name dialog box appears. 2. Up to 64 characters can be used for a folder name. Specifying Target Data/ Tolerance 3. The data(s) folder under Sample is provided by default. You cannot link a target to the folder, and cannot delete or rename the folder. While the folder is selected, perform measurement. Or, move sample data from the document file to the folder. 56 CHAPTER 2 : OPERATION GUIDE 5. Select Tool - Change Target from the menu bar. [. . . ] 65 Send Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Simultaneous cut-and-paste/copy-and-paste of the list data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Single Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]