User manual KONICA PAGESCOPE NETWORK SETUP V3.2

[. . . ] PageScope Network Setup 3. 2 User Manual Foreword Welcome Thank you for using KONICA MINOLTA PageScope Network Setup. PageScope Network Setup is utility software which allows simple network setup of devices such as printers. It allows setup of devices on networks connected using TCP/IP or IPX protocol to be handled together. PageScope Network Setup supports the following functions. [. . . ] · Device Information · TCP/IP · NetWare Print 4. 1 Configuring Device Information Perform the following steps to configure device information. On the device list, click the icon of the device whose information you want to configure. Select Device Setup on the Setup menu to display the Device Setup dialog box. You could also click the toolbar button. Click the General tab. 11 4 Changing the Device Setup You can configure and view the following items on the General tab. Device Model Name This is the device model name. You cannot change the device model name here. Device Name This is the device management name. You can type up to 16 characters into the text box to input a new name. However, if the existing device management name exceeds 16 characters, you can type up to 255 characters for a new name. If asterisks (*) appear in the device name, non-ASCII characters have been used for naming the device. Device Description This is a description of the device. You can type up to 16 characters into the text box to input a new description. However, if an existing description of the device exceeds 16 characters, you can type up to 255 characters for a new description. Type in the community name and then click OK. · If both DHCP and BOOTP are selected, DHCP is given priority. 14 4 Changing the Device Setup 4. 3 NetWare Print Setup Note · You must have NetWare Client 32 installed on your system in order to setup for NetWare printing. · NetWare supervisor privileges are required in order to change the NetWare Print Setup. You must login to the NetWare network with supervisor privileges in order to configure NetWare for printing. · You must have IPX protocol installed on your device in order to configure a NetWare print setup. · If you have already configured a NetWare print setup with another tool, the existing configuration will be deleted when you complete this setting. Perform the following steps to configure a device for NetWare printing. On the device list, click the icon of the device you want to configure. Select Device Setup on the Setup menu to display the Device Setup dialog box. [. . . ] From the Client List box, select the IP address that will be assigned the hardware address. A dialog box for setting the hardware address appears. 3. 4. Enter the hardware address into the Hardware Address box. The setting appears in the Client List box. [. . . ]