User manual KONICA REVIO C2

[. . . ] Digital Still Camera User's Guide Thank you for your purchase. To ensure correct usage of this product, please read this User's Guide and the warranty card carefully and keep them in a safe place for future reference. Before accepting the warranty card, please make sure that the date of purchase and the dealer's details have been completed. Contents Important Safety Precautions . Setting the Display Language, Date and Time . [. . . ] Use the / Pressing the button to adjust to the desired brightness. button darkens the image, and pressing the button brightens the image. Press the SET button. The set values are saved and the through-image is displayed. Checking the Recorded Image (QUICK VIEW) The recorded image can be checked immediately after it is recorded so that you can decide whether or not you want to save it. 1 2 3 4 5 6 7 8 9 10 Display the REC menu. Use the / button to select (QUICK VIEW). Press the SET button. Use the / button to select "ON". Press the SET button. The recorded image is displayed and the screen for deciding whether or not the image should be saved appears. Use the / button to select "YES" or "NO". Press the SET button. When "YES" is selected, the LCD monitor turns off and the image is saved. When "NO" is selected, the image is not saved and a new image can be recorded. · If the SET button is not pressed within about 3 seconds in Step 10, the image is saved automatically. 15 Setting the Sharpness of the Image (SHARPNESS) The contours of images can be sharpened or softened. 1 2 3 4 5 6 Display the REC menu. Use the / button to select (SETUP). Press the SET button. Use the / button to select (SHARPNESS). Press the SET button. Use the / button to select the desired sharpness. Selecting "HARD" will sharpen contours and make the image sharper. Selecting "SOFT" will soften contours and make the image softer. "NORMAL" is the normal setting. The set values are saved, and the through-image is displayed. 7 Setting the USB Mode See page 24 for the USB modes. Adjusting the Date and Time (DATE SET) The date and time can be set and modified. Note: The backup condenser retains the set date and time. The set contents are therefore retained even when you replace the AAA batteries that power the camera. Backup duration during battery replacement is about 15 minutes. 1 2 3 4 5 6 Display the REC menu. Use the / button to select (SETUP). Press the SET button. Use the / button to select (DATE SET). Press the SET button. Use the / button to adjust the "Year", and then press the SET button. [. . . ] The date must be set again if this limit is exceeded. · The camera is not connected correctly to the PC. · The lens cover is closed. 26 26 28 Main Specifications Type Active pixels Recording medium Number of Recordable Images Recording method Image format Imaging elements Lens Focus adjustment Recording range White balance Shutter speed Viewfinder Flash Recording modes LCD monitor Playback Deletion Buzzer PC interface USB mode Power supply Appearance Size (W × H × D) Weight Supplied accessories Digital still camera with LCD monitor and integrated recording and playback functions 1. 22 megapixels Approximately 14 MB internal memory Super fine 1280 x 960 pixels Fine 1280 × 960 pixels Economy 640 × 480 pixels Still picture: JPEG standard, Movie: Motion JPEG Design rule for Camera File System standard (DCF) compatible 1/3. 4 inch CMOS sensor f=4. 5 mm (Equivalent to f=37 mm when converted to 35 mm camera), F2. 8 Manual/Fixed Normal mode: 0. 6 m - Macro mode: 0. 3 m - 0. 6 m Auto Electronic shutter 1/15 - 1/6600 sec. Optical viewfinder Auto flash AUTO/ OFF Single shooting/Macro/Self-timer/Movie/Digital zoom (-2. 0 times) 1. 6-inch transmission type D-TFD color LCD monitor Single frame, slideshow, index playback Single frame/all frames (formatting) Various warnings during recording USB MSDC/PC CAMERA AAA alkaline batteries (2 pieces/supplied), AAA nickel-hydrogen batteries (2 pieces/sold separately) Aluminum 85. 8 x 55. 8 x 13. 5 mm 70 g (excl. batteries) Strap, USB cable, AAA alkaline batteries (2 pieces), CD-ROM, Quick Guide, Warranty 29 Warranty and After-sales Service For repair, handling and care, first consult the dealer from whom you purchased the camera. Warranty (separately attached) Before accepting the warranty card, please make sure that the date of purchase and dealer of purchase and the dealer's details have been completed. After reading the warranty, keep it in a safe place. [. . . ]