User manual KORG AX1B

[. . . ] Decide if your using NTSC or PAL format (USA standard is NTSC, PAL is usually Europe) and set the switch on the rear panel to the proper setting. Connect the Video output of the AX1B to your monitor (S-Video or Composite RCA type) and the Audio output of the AX1B to a mixer/DJ mixer or Monitor Audio inputs. If you are using the AX1B as an audio processor only, set the CONTROL SELECT switch to AUDIO. If you are using the AX1B to process video, set the CONTROL SELECT switch to VIDEO. [. . . ] If you are using the AX1B to process audio and video simultaneously, set the CONTROL SELECT switch to COMBI. Selecting and storing Programs to the Program Memory Keys 1. Turn the PROGRAM/BPM knob to select a program. When you have selected a Program you like, press and hold the PROGRAM MEMORY key that you would like to use until it flashes. Selecting and Storing Combi Programs 1. To select a preset COMBI program, set the CONTROL SELECT switch to Combi and use the PROGRAM/BPM knob to select a COMBI program. To create your own Combi, select the Audio program you would like to use by setting the CONTROL SELECT switch to AUDIO and choosing your Video program. Next, set the CONTROL SELECT switch to VIDEO and select the Video program you would like to use. To store a Combi to a PROGRAM MEMORY location, set the CONTROL SELECT switch to COMBI. Press and hold the FUNCTION key, then press and hold down the desired PROGRAM MEMORY key until it flashes (approx. two seconds). 2 AX1B EasyStart Sampling and Playing Back an Audio Phrase or Motion Video 1. To stop playback press the SAMPLE 1 or SAMPLE 2 key again. Syncing BPM Effects using Tap Tempo/Auto BPM 1. Select a program in the BPM FX (Audio 50-61, Video 54-60) or BPM PTN (Audio 62-69) group. Tap the TAP/BPM key in time with the music and the effect will sync to the incoming audio. To use the AUTO BPM detect, press and hold the TAP/BPM key for several seconds until you see three dots in the screen. 3 AX1B EasyStart Syncing BPM Effects using MIDI Clock 1. Select a program in the BPM FX (Audio 50-61, Video 54-60) or BPM PTN (Audio 62-69) group. Enter the MIDI Edit mode by pressing and holding the FUNCTION key and then press the SAMPLE 2 key. Press the SAMPLE 1 key so that it is lit. To store this setting, press and hold the REC/STOP key for a few seconds. Make sure you have the MIDI OUT of your MIDI clock source connected to the MIDI IN of the AX1B. Displaying an Audio Waveform or Internal Pattern 1. [. . . ] Make sure you have the MIDI OUT of your MIDI clock source connected to the MIDI IN of the AX1B. Displaying an Audio Waveform or Internal Pattern 1. Press and hold the FUNCTION key and press the SAMPLE 1 key to enter the Pattern Display mode. To select one of the 8 pre-selected patterns press any of the 1-8 PROGRAM MEMORY keys. To change the pattern that is assigned to that key, press and hold the desired 1-8 PROGRAM MEMORY key and turn the PROGRAM/BPM knob until the desired pattern is displayed. [. . . ]