User manual KORG KAOSS PAD ENTRANCER

[. . . ] Using the unit in the following locations can result in a malfunction. Do not connect it to an AC outlet of voltage other than that for which your unit is intended. Operate this unit at a suitable distance from radios and televisions. If the exterior becomes dirty, wipe it with a clean, dry cloth. [. . . ] Recording will end when you press the key again or when the memory capacity has been reached. If you select an effect clip pattern (40­59) in pattern display mode, you will be able to record a pattern. Turn on the [SAMPLE 1] or [SAMPLE 2] key to record the still image that you sampled. When you touch the touch-pad, the video clip will play back according to the position of your finger on the touch-pad. For a program not in the "SAMPLE/PLAY" group 1. With the [SAMPLE 1] and [SAMPLE 2] keys turned off, hold down the [REC/STOP] key and touch the touch-pad; the sampled video clip will playback at normal speed. If you hold down the [REC/STOP] key and press the [HOLD] key, the [REC/STOP] key will be held, allowing you to play back the video clip simply by touching the touch-pad. Hold will be cancelled when you press the [REC/ STOP] key once again. When you hold down the [REC/STOP] key and press the [HOLD] key, playback will be held. When you press the [REC/STOP] key once again, the hold will be cancelled. Pattern display will be cancelled if you play back a motion video sample while a pattern is displayed. You cannot display a pattern during sample playback. If you have recorded a phrase from the input into the [SAMPLE 1] and [SAMPLE 2] keys, you can select a program from the "SAMPLE/PLAY" group (90­99) and use the touch-pad to control the playback speed or reverse playback. If you have selected a program from other than the "SAMPLE/PLAY" group, pressing the [SAMPLE 1] or [SAMPLE 2] key will play back the phrase that was recorded on each key. You can record approximately six seconds of monaural sound in each key. The recorded phrase will be lost when you turn off the power. It is not possible to save the recorded phrase. The [REC/STOP] key LED will blink, and you will be in record-ready mode. Press either the [SAMPLE 1] or [SAMPLE 2] key that you want to use for recording. The playback audio will not be heard at this time. Press the [REC/STOP] key; the [REC/STOP] key LED will light and recording will begin. Recording will end when you press the [REC/STOP] key once again. [. . . ] (2) MAP DATA DUMP REQUEST R +----------------+--------------------------------------------------+ | Byte | Description | +----------------+--------------------------------------------------+ | F0, 42, 3c, 6x | EXCLUSIVE HEADER KPE1(x:=F) or KP2(x:=7) | | 0001 1101 (1D) | MAP DATA DUMP REQUEST 1DH | | 1111 0111 (F7) | EOX | +----------------+--------------------------------------------------+ When this message is received, the MAP DATA DUMP(Function:4Dh) message will be transmitted by the same ID(KPE1:6Fh or KP2:67h). (3) GLOBAL DATA DUMP REQUEST R +----------------+--------------------------------------------------+ | Byte | Description | +----------------+--------------------------------------------------+ | F0, 42, 3c, 6x | EXCLUSIVE HEADER KPE1(x:=F) or KP2(x:=7) | | 0000 1111 (0E) | GLOBAL DATA DUMP REQUEST 0EH | | 1111 0111 (F7) | EOX | +----------------+--------------------------------------------------+ When this message is received, the GLOBAL DATA DUMP(Function:51h) message will be transmitted by the same ID(KPE1:6Fh or KP2:67h). (4) ALL DATA DUMP REQUEST R +----------------+--------------------------------------------------+ | Byte | Description | +----------------+--------------------------------------------------+ | F0, 42, 3c, 6x | EXCLUSIVE HEADER KPE1(x:=F) or KP2(x:=7) | | 0000 1111 (0F) | ALL DATA DUMP REQUEST 0FH | | 1111 0111 (F7) | EOX | +----------------+--------------------------------------------------+ When this message is received, the ALL DATA DUMP(Function:50h) message will be transmitted by the same ID(KPE1:6Fh or KP2:67h). (5) MAP WRITE REQUEST R +----------------+--------------------------------------------------+ | Byte | Description | +----------------+--------------------------------------------------+ | F0, 42, 3c, 6x | EXCLUSIVE HEADER KPE1(x:=F) or KP2(x:=7) | | 0001 0001 (11) | MAP WRITE REQUEST 11H | | 000m mmmm (mm) | Destination Map Number [NOTE 1]| | 1111 0111 (F7) | EOX | +----------------+--------------------------------------------------+ When this message is received, a WRITE COMPLETED(Function:21h) message or a WRITE ERROR(Function:22h) message will be transmitted by the same ID(KPE1:6Fh or KP2:67h). [. . . ]