User manual KORG MR-1000

[. . . ] E1 Precautions Location Using the unit in the following locations can result in a malfunction. · In direct sunlight · Locations of extreme temperature or humidity · Excessively dusty or dirty locations · Locations of excessive vibration · Close to magnetic fields THE FCC REGULATION WARNING (for U. S. A. ) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Here's how to set the internal clock. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select and confirm "SYSTEM. " The system setting (SYSTEM) screen will appear. Use the P-dial to select and confirm the date and time indication in the top line. The date and time setting (Clock) screen will appear. Push Push 3. Use the P-dial to select and confirm "Year. " The selection icon will change from " " to " ", and the year indication will be highlighted. Turn the P-dial to select the year, and press the P-dial (or the menu button) to confirm. The selection icon will change from " " to " ". Push Push 5. In the same way, use the P-dial to select and confirm the "Month, " "Day, " "Hour, " "Minute, " and "Sec. " 6. When you've finished making settings, press the menu button to return to the system setting (SYSTEM) screen. Alternatively, you can return by using the P-dial to select and confirm "<-Back" in the screen. If you disconnect the AC adaptor or leave the batteries out for about a week, the date and time settings will be reset, so you will have to install batteries or connect the AC adaptor and make these settings again. If the date and time have been reset, a message to remind you of this will be displayed. The time will continue to advance while you're setting it. 28 Protecting a project Here's how to protect a project. If you edit the name or delete or edit the mark settings of a project that is protected, these settings will revert to their original state when you select another project or turn off the power. A protected project is indicated by a lock icon displayed in the project/file information field (the top line) of the level meter screen. You can't protect an audio file that was recorded by a device other than the MR-1000 (such files will be located in the AUDIO folder). Press the menu button, and in the menu list (MENU) screen, use the P-dial to select and confirm "LIBRARY. " The library select (LIBRARY) screen will appear. Use the P-dial to select and confirm the project whose Protect setting you want to change. (See "Selecting and playing back a project/file, " p. 19) If you want to protect the currently selected project, simply press the P-dial twice to confirm. The project/file edit screen will appear, with the name of the project you just selected shown at the top. Turn the P-dial to move the selection icon to "Protect. " Push 5. Each time you press the P-dial, the setting will alternate between protecting ( ) and un-protecting ( ) the project. When you've finished making the setting, press the menu button to return to the library select (LIBRARY) screen. Deleting a project/file Here's how to delete a file. Once you've deleted a file, it cannot be recovered, so use this operation with care. [. . . ] Please enter a valid project name (one or more alphabetical character, numeral, or symbol). Protected Project. · The operation cannot be executed because the project is protected. Turn off the project protect setting. 50 Project Name Error. Delete illegal folder. · An identically named project/file already exists. Alternatively, use USB mode to delete the project/file and the directory of the same name. System File Error. · The system file required for "Load System" does not exist, or the length of the file does not match. [. . . ]