User manual KORG N5

[. . . ] To change categories, press > CURSOR key to highlight Cat: (category currently selected) press INC key (or use DIAL) to move to new Category ­ Audition Riff function will continue press AUDITION key to stop playback press F7 key (below Cancel) to exit Select by Category function. 2. Playing Combinations 640 internal / 1664 Combis available when fully expanded ­ each Combi allows for split, layer and velocity-switching of up to 8 Programs , plus dual polyphonic arpeggiators! 1. 2. Press COMBI key use front panel BANK and INC/DEC keys or DIAL to select and play Combis. Demonstrate Select by Category function in COMBI mode ­ works the same way as in Program mode above, but the Audition Riff function is not available in COMBI mode. EXB-PCM Expansion boards: If the TRITON Rack you are working with includes installed EXB-PCM boards, you can access and play the Programs and Combis by pressing the BANK key, then selecting the desired EXB A-H BANK keys, followed by the Program/Combi numbers. ! The Arpeggiators 2 programmable Polyphonic Arpeggiators - 5 preset / 328 user programmable arpeggio patterns; store 1 per Programs, 2 per Combination, 2 per Multi; sync to MIDI clock with external sequencers; use as a step-grid drum pattern programming tool 1. Select Combination A000 Romance Layers press ARP ON/OFF key to turn Arpeggiator on, then trigger from controller press SELECT key (above the floppy drive) until C LED lights, play and rotate knobs 1-3 to control TEMPO, GATE and VELOCITY press ARP ON/OFF key to turn Arpgeggiator off. Many Programs and Combis are set to automatically turn on the Arpeggiator function when selected. [. . . ] ! 3 TRITON Rack EasyStart ! More on the Arpeggiator functions, including editing and recording/sync applications in the TRITON Rack Owner's manual and TRITON USER GUIDE (korg. com). The Effects 5 stereo insert and 2 master effects plus 3-band EQ for every Program, Combi and Multi, select from 102 available effects including dynamic modulation, plus many syncable effects. 1. 2. In COMBI mode, select Combination INT-A 001 Lonely Moon press MENU key (below DIAL) press F7 key until IFX is highlighted in display press F8 key and overview the five stereo insert effects in this Combination. Press MENU key press F7 key until MFX is highlighted in display and 3-band EQ press EXIT key (left of MENU key). press F8 key and overview the two master effects !! Editing pages for insert and master effects are accessed by pressing F-keys below desired effect tabs in the display. More on effect routing and editing in the TRITON Rack Owner's Manual and TRITON USER GUIDE (korg. com). REALTIME CONTROL knobs 3 and 4 are set to control insert (3) and master (4) effect wet/dry balance for most Programs and Combis selected. Try this when working with the Audition Riff function in Program mode. Up to 5 stereo insert effects are available in SAMPLING mode, so that you can sample through the insert effects. Once the multisample is converted to a Program, additional insert effects can then be used in the new Program if desired. Sampling Overview 16 Mbyte sample memory, expandable to 96 MB with SIMM modules (3 slots); 48k/16 bit linear mono and stereo samplingup to 1000 multisamples/4000 samples; compatible with AIFF, WAVE, AKAI S1000/3000, Korg sample formats Additional Features: · · · Sampling time: Fully expanded, the TRITON-Rack allows for up to 17 minutes/28 seconds of sampling time. Visual Waveform Editing: TouchView display makes viewing and editing sample data easy!· A total of eight EXB-PCM expansion boards can be installed, each with its own dedicated Bank for Programs and Combinations. · · Three SIMM modules can be installed to expand the sampling memory to 96 Mbytes. The Audition Riff function provides over 350 riffs appropriate for different types of sound, to easily try out sounds right from the front panel, without an external keyboard. · TRITON song data can be played back with the TRITON-Rack DEMO/SONG mode, and loaded via floppy disk or optional EXB-SCSI Interface Board and an external drive. TRITON Rack available options · EXB-MOSS DSP Synthesizer Board: 13 oscillator, 6-voice MOSS (Multi-Oscillator Synthesis System) allows many types of physical modeling, plus VPM (variable phase modulation) synthesis. MOSS Programs can be used with PCM Programs in Combinations or Multis. 128 MOSS Programs and 63 MOSS Combinations added when installed. · · EXB-DI Digital Interface Board: Adds ADAT optical connectors (6 channels) to the TRITON-Rack. EXB-mLAN Interface Board: Allows connection to other mLAN-compatible electronic musical instruments and computers, allowing high-volume transmission and reception of audio and MIDI data. · EXB-SCSI Interface Board: Allows you to save and load TRITON series data via an external SCSI device. You can also load AKAI (S1000/3000) sample and program files, and Korg, AIFF, or WAVE format sample files. Internal TRITON-Rack sampling data can be exported as AIFF or WAVE format sample files for further editing on computer-based systems. [. . . ] Press F5 key (below START) to playback. !! If you need to re-load the factory Program, Combination and Global data from disk, follow the same procedure as above, only navigate to and load the file on the TNRFD00P disk: "PRELOAD. PCG". Be aware that the above load procedures will overwrite any demo song, Multi or . PCG data in internal memory! A word about the TNRFD01P disk: This disk contains the sample data used for the demo song "Deep Cut" (DCUT_SMP. KSC). Navigate to this ". KSC" (Korg Script) file and load the data as above in order to have this sample data playback in the song. [. . . ]