User manual KORG NANOSERIES

[. . . ] 5 Writing scene data into your Korg nanoSERIES MIDI controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 KORG KONTROL Editor screens and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Device select screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] - Windows XP and Windows Vista are trademarks of Microsoft Corporation in the US and other countries. - All product names and company names are the trademarks or registered trademarks of their respective owners. - Specifications and appearance are subject to change without notice for improvement. KORG KONTROL Editor Owner’s manual 1 Introduction Thank you for purchasing a Korg nanoSERIES MIDI controller. To help you get the most out of your new instrument, please read this manual carefully. What is the KORG KONTROL Editor? The KORG KONTROL Editor lets you edit the parameters in your Korg nanoSERIES MIDI controller, and save the settings on your computer. Caution Do not disconnect your Korg nanoSERIES MIDI controller while the KORG KONTROL Editor is running. Do not use your Korg nanoSERIES MIDI controller or the KORG KONTROL Editor while any data is being transmitted. Operating requirements Mac OS X Computer Operating system Apple Macintosh computer with Intel or Power PC processor that is equipped with a USB port and meets the requirements for Mac OS X Mac OS X 10. 3. 9, or Mac OS X 10. 4. 7 or later Computer equipped with a USB port (a USB chipset made by Intel is recommended) that meets the requirements for Microsoft Windows XP/Vista Microsoft Windows XP SP2 or later, or Microsoft Windows Vista SP1 KORG KONTROL Editor Owner’s manual Windows Computer Operating system 2 Installation Installation for Windows users Proceed as follows to install the software in Windows. 1 2 Double-click “Startup_E. exe” to start the installation process. The KORG KONTROL Editor Installer screen will appear. Follow the on-screen directions to install the software. Installation for Mac OS X users Proceed as follows to install the software in Mac OS X. 1 2 Double-click “KORG KONTROL Editor. pkg” to start the installation process. Once the installer begins, follow the on-screen directions to complete the installation. KORG KONTROL Editor Owner’s manual 3 Quick start Starting the KORG KONTROL Editor In order to use the KORG KONTROL Editor, you must download the Korg USB-MIDI driver from the Korg website and install it as described in the accompanying documentation. (http://www. korg. com) 1 2 Use a USB cable to connect your Korg nanoSERIES MIDI controller to your computer. In the “KORG”-“KORG KONTROL Editor” folder, select “KORG KONTROL Editor” to begin. Mac OS X Windows The “KORG” folder is located in the “Applications” folder. The “KORG” folder is located in the taskbar “Start”-“All Programs” 3 The main screen for the connected controller will appear, and then scene data will automatically be read from the Korg nanoSERIES MIDI controller. If more than one Korg nanoSERIES MIDI controller is connected, a Korg MIDI controller selection screen will appear. Select the device whose settings you want to edit. Editing scene data Here’s how to edit scene data in the main screen. 1) [SCENE] buttons will be displayed if the device has more than one scene. 2) In the screen, click the control that you want to edit. 3) The parameters of the selected control are shown in the parameter editing area. KORG KONTROL Editor Owner’s manual 4 What are scene data and scene sets? Parameters are assigned to the controls (sliders, knobs, X-Y pad, etc. ) of a Korg nanoSERIES MIDI controller. [. . . ] Edit the parameters here. For details on each parameter, refer to the owner's manual of your Korg nanoSERIES MIDI controller. Other operations Cut, Copy, Paste, Clear You can edit the setting for the [SCENE] buttons and the controls in the [CONTROL] tab, by performing “Cut, ” “Copy, ” “Paste, ” and “Clear” operations from the “Edit” menu. Drag and drop You can exchange the setting for the [SCENE] buttons and the controls in the [CONTROL] tab, you can exchange the settings by dragging and dropping. To copy the settings, drag and drop while holding down the [Ctrl] key (Mac: [Option] key). Undoing the most recent operation By selecting the “Undo” command from the “Edit” menu you can undo the previous operation. Redoing an undone operation By selecting the “Redo” command from the “Edit” menu you can return to the state prior to executing the “Undo” command. KORG KONTROL Editor Owner’s manual 8 Preference settings Choose “Preferences . . . ” from the menu to access the Preferences dialog box. MIDI ports Specify MIDI ports manually Turn this on if you want to specify the MIDI ports manually instead of using automatic device detection. If this setting is on, use the MIDI IN and MIDI OUT fields to specify the ports to which your Korg nanoSERIES MIDI controller is connected. MIDI IN Specify the MIDI IN port to which your Korg nanoSERIES MIDI controller is connected. MIDI OUT Specify the MIDI OUT port to which your Korg nanoSERIES MIDI controller is connected. Other Load data automatically If this setting is off, data will not be automatically loaded from your Korg nanoSERIES MIDI controller when the main screen for the device is shown. Warn when writing data If this setting is off, a warning dialog box will not appear when writing data to your Korg nanoSERIES MIDI controller. KORG KONTROL Editor Owner’s manual 9 File management The following data can be transferred between the KORG KONTROL Editor and your Korg nanoSERIES MIDI controller. [. . . ]