User manual KORG PA50SD

[. . . ] 1. 0 E 1 Instructions pertaining to a risk of fire, electric shock, or injury to persons IMPORTANT SAFETY INSTRUCTIONS WARNING — When using electrical products, basic precautions should be followed, including the following: Location. Using the unit in the following locations can THE FCC REGULATION WARNING (FOR THE U. S. A. AND CANADA ONLY) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Start recording after bar -1. RT/Pads Rec:NewSong Style:NewBossa Resol:HI Sel. Tempo 99% Perf:01-01 Metro:On1 RT/Pad:REC Ch/Acc:REC Ch/Acc These parameters let you decide the track status during recording. RT/Pads: This Backing Sequence track includes the four Realtime (Keyboard) tracks, and the four Pads. They will be Song tracks 1-8, as in the following table: RT/Pad track Upper 1 Upper 2 Upper 3 Lower Pad 1 Pad 2 Pad 3 Pad 4 Song track/Channel 1 2 3 4 5 6 7 8 Style This non-editable parameter shows the selected Style. If no Style is selected, the name will be empty. You can select a different Style, using the STYLE section (see “Selecting a Style” on page 26). 0…99% This non-editable parameters shows the remaining recording space in memory, as a percentage. Perf or STS (Performance or STS) This non-editable parameter shows the selected Performance or STS (depending on the last item selected). If no Performance or STS is selected, the name will be empty. You can select a different Performance, using the PROGRAM/PERFORMANCE section (see “Selecting a Performance” on page 25). To select one of the four STS for the current Style, use the F1-F4 buttons. Resol (Resolution) Use this parameter to set the quantization during recording. Quantization is a way of correcting timing errors; notes played too soon or too later are moved to the nearest axis of a rhythmic “grid”, set with this parameter, thus playing perfectly in time. (1/32)… (1/8) Grid resolution, in musical values. For example, when you select 1/8, all notes are moved to the nearest 1/8 division. When you select 1/4, all notes are moved to the nearest 1/4 division. Hi (no quantization) 1/16 Ch/Acc: This Backing Sequence track includes all Style tracks, including recognized chords. If this tracks has already been recorded, it will not be heard during recording of the other Backing Sequence track. If there are recorded data, they will be heard during recording of the other Backing Sequence track. All previously recorded data will be deleted. CHORD/ACC STEP RECORDING PAGE While you are in Backing Sequence mode, press RECORD, then one of the B VOLUME/VALUE buttons, to access the Chord/Acc Step Recording mode. The RECORD LED turns on. Step Chord/Acc M001. 01. 000 Tempo:120 Style:Umpl_Bossa Perf :01-1 C Maj SE:Off /C 1/8 Sel. Tempo (Select Tempo) Select this parameter to use the TEMPO/VALUE section to select the Tempo. When you select this parameter, the VALUE LED turns off. Metro (Metronome) Side arrow ( ) This parameter sets the metronome mode during recording. Off The metronome can be heard only during the precount. The small arrow next to a parameter means that its value is effective at the current position. For example, if you are at the “M003. 01. 000” position, and an arrow lights up next to the Chord parameter, this means that a chord change happens at the “M003. 01. 000” position. 86 Backing Sequence operating mode Chord/Acc Step Recording page M(easure) This is the locator. It shows the current position of the Step Editor. To go to a different position within the Song, select this parameter, then use the TEMPO/VALUE controls, the A VOLUME/VALUE buttons, or the < > buttons (while the << >> buttons let you move to the previous or following measure). When using one of these controls, the locator moves in steps of 1/8 (192 ticks), or jumps to the next event. [. . . ] Does the card contain data compatible with the Pa50SD?130 139 130 130 131 Make sure that the Percussion and Drum Track is set to Drum Mode and the external device has not transposition applied. This is part of the sound, and not a problem. 13 127 125 43 45 24 22 22 Solution Page Wrong sounds 133 133 133 126 127 22 46 78 129 46 78 The selected Performance, Style or STS recalled the effect “15 Analog Record”, simulating the noise of a old vinyl recording. Technical specifications 239 24. [. . . ]