User manual KORG PA60 EASY START GUIDE

[. . . ] The “Performance” is the basis for custom tailoring the PA-60 to your creative needs. In addition to its strength as a compositional tool, the PA-60 is an outstanding keyboard for the entertainer and performing professional. The XDS Dual Sequencer offers two independent sequencers, with separate transport controls and a DJ style cross fader for seamless medleys. One sequencer can load while the other is playing for nonstop action. [. . . ] Below the DISPLAY are four buttons labeled SINGLE TOUCH SETTINGS. Press one of these, and you can see the sounds assigned to the STYLE change. There are four STS (Single Touch Settings) for each STYLE. This feature (STS) allows very quick set up of sounds that correspond to the selected STYLE. 3 2. PA60 EasyStart Try playing different STYLES and using the STS buttons to call up new sounds. Play with both hands to hear these parts. To turn a part on or off, press BOTH of the VALUE/VOLUME buttons adjacent to that part on the DISPLAY. To adjust the volume of a part; highlight the part by pressing the appropriate button (UPPER 1, UPPER 2, UPPER 3, LOWER 1). Pressing the left hand VOLUME/VALUE button lowers the volume of that part. Pressing the right hand VOLUME/VALUE button raises the volume of that part. If you like, you can also select different sounds manually for each part. Make sure that the PROGRAM button to the far right of the PA-60 is lit before you continue this operation! 7. 3. 5. 6. ! Highlight the part playing the sound you wish to change (be sure the part is active – i. e. the keyboard icon appears next to the name of the sound). Now use the PROGRAM BANK buttons to select a bank of sounds. To see more sounds inside a bank, use the PAGE+ and PAGE- buttons. Highlight the name of the new sound and play a few keys to see if this is the sound you want. If it is, press STYLE PLAY button again. The name of the new sound will appear in the DISPLAY. If not, select another sound using this same method. There are four PADS and a STOP PAD above the keyboard. Each one is assigned a different sound or sound effect. [. . . ] Press RECORD button twice (off and on) and select the CHORD /ACC STEP MODE. The DISPLAY shows the Measure, Beat and Click of the Sequencer. It also shows the current STYLE, current PERFROMANCE set-up, the VARIATION, as well as the Chord Type and Bass Note. All of these features may be edited and changed using by highlighting the item to change, dialing up a new value, and pressing the ENTER button. 2. [. . . ]