User manual KORG PA80

[. . . ] In the task bar, click the [Start] button. A dialog box will appear, allowing you to specify the drive and directory. In the control panel, double-click the [Hardware] icon, and the hardware wizard will start up. Insert the floppy disk included with the AG-001B into the floppy disk drive of your computer. [. . . ] When the PA80 is connected, [Independent Synth/ MIDI Out] is not used, so do not check this item. If you check it, there may be communication problems. [MIDI Out Messages] allows you to select the messages that will be transmitted to the PA80. When you have finished making your selections, click the [OK] button. If installation has been performed correctly, the KORG MIDI Driver icon will appear in the PatchBay window when PatchBay is started up, as shown below. (The Modem/Printer port displays may be different, depending on your setup. ) INSTALLING THE KORG MIDI DRIVER INTO THE MACINTOSH Note: In order to use the KORG MIDI Driver, Apple MIDI Manager and PatchBay must already be installed. Use the Apple MIDI Manager and PatchBay that are included with the MIDI application that you are using. When the KORG MIDI Driver is used, the “Modem MIDI Out/Port settings” dialog box allows you to specify the MIDI channels and types of messages that will be sent to the PA80. If you do not require this function, you can simply use the Apple MIDI Driver without using the KORG MIDI Driver. When using the Apple MIDI Driver or when using a MIDI application (sequencer) which does not use the Apple MIDI Driver, refer to page 4. Copy the KORG MIDI Driver from the disk included with the AG-002B into the system folder of the startup drive. Check Port Enabled for the port to which the PA80 is connected, and select [1 MHz] as the Interface Type. (Since the PA80 does not contain a KORG PC IF, do not select [KORG PC IF]. Here you can select the MIDI channels/messages that will be output to each port. Only the channels/messages which are checked will be output. If the system folder contains the Apple MIDI Driver, either delete it or move it to another folder. Be careful not to delete or move the Apple MIDI Manager. Note: The KORG MIDI Driver includes the functions of the Apple MIDI Driver. From the Special menu, choose “Restart”. [. . . ] The [Specify application for DOS extension] window will appear. MS-DOS® uses a filename extension consisting of a period and three characters to distinguish different types of files. From the list that appears in the lower part of the dialog box, select a MIDI application (sequencer) that can use SMF data. The icon selected for the application item will appear. [. . . ]