User manual KORG PROPHECY

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. [. . . ] Note: All events on the very first tick (M001. 01. 000), like Perf, Style, Tempo, Chord, Style Element selection, cannot be deleted. Style M001. 01. 000 Measure Beat Tick Measure: Measure or bar number. Beat: Divider in the Time Signature ratio (e. g. , a quarter in a 3/4 time). Tick: Minimal sequencer's resolution. The Pa50 internal sequencers feature a resolution of 384 ticks per quarter. INSERT When the Measure parameter is selected, press INSERT to insert a measure starting from the current position. All Chord/Acc events contained into the current measure will be moved to the following measure. The event at the Mxxx. xx. 000 position (i. e. , exactly at the beginning of the measure, like a Time Signature or Style change) will not be moved. DELETE When the Measure parameter is selected, press DELETE to delete the current measure. All Chord/Acc event contained into the following measures are moved to the current measure. SHIFT + DELETE When the Measure parameter is selected, press SHIFT + DELETE to delete all events in the Style tracks, starting from the current position to the end of the Song. To delete all events in the Style tracks, go back to the M001. 01. 000 position, and press SHIFT + DELETE. SHIFT + DELETE When the Perf parameter is selected, press SHIFT + DELETE to delete all Performance Change events, starting from the current position to the end of the Song. To delete all Performance Change events in the Song, go back to the M001. 01. 000 position, and press SHIFT + DELETE. Note: All events on the very first tick (M001. 01. 000), like Perf, Style, Tempo, Chord, Style Element selection, cannot be deleted. SE (Style Element) cally recognized. While recognizing a chord, the status of the BASS INVERSION button will be considered. "No chord" means that the accompaniment will not play at the current position (apart for the Drum and Percussion tracks). To select the "No chord" option, press F1 to select the Name part of the Chord, then use the TEMPO/VALUE section to select the very last value (C. . . B, Off). Note: If you replace a chord with a different one, please remember that the Lower track will not be automatically changed. Transport controls While in Step Mode, you can use various control panel buttons to accomplish the editing procedure. << or >> (Rewind or Fast Forward) This is the Style Element (i. e. , a Variation, Fill, Intro, or Ending). The length of the selected Style Element is always shown on the measure counter, at the top of the display: Use these buttons to move to the previous or following measure. These commands are effective even if the M(easure) parameter is not selected. < or > (Previous or Next Step) This will let you know where to place the following Style Element Change. For example, if you inserted an Intro event lasting for 4 measures, you can insert 4 empty measure after this event, and a Variation event at the end of the Intro, beginning at the 4th empty measure. "Off " means that the accompaniment will not play at the selected position ­ only the Realtime tracks will play. [. . . ] Cannot save data to a floppy disk Is the disk formatted?Is the write protect tab of the disk in the protect position?Cannot load data from a floppy disk Is the disk inserted correctly?Does the disk contain data compatible with the Pa50? [. . . ]