User manual KORG PX4B

[. . . ] Using the unit in the following locations can result in a malfunction. Operate this unit at a suitable distance from radios and televisions. If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not connect it to an AC outlet of voltage other than that for which your unit is intended. [. . . ] The settings you select here are remembered even when the power is turned off. You can also set the tempo by pressing the TAP button twice at the desired rhythm. Use the Value dial to set the level of Rhythm sound. The bass note will be affected only if bass is turned on. Use the Value dial to set the amount of Rhythm sound that will be sent to reverb modeling. This parameter has no effect if you have selected a program that does not use reverb modeling, or if the reverb effect level is "0. These parameters are added only if you select "CHAIN" as the rhythm pattern. press the ENTER/REC button to access the Chain Parameter Select screen. Use the /® buttons to select the location (1--8) for which you want to change the pattern, and use the value dial to select the pattern (p. Use the L/M buttons to specify the number of times (1--8) that the selected pattern will repeat. An audio source from the AUX jack or a phrase you play on your bass can be recorded, and played back repeatedly as a loop. This provides a convenient way to practice by playing along with the repeating phrase. You can slow down the playback speed without affecting the pitch, which can help you to learn difficult phrases. You can choose from six levels of playback speed: 100%, 90%, 80%, 75%, 66%, and 50%. During playback, you can press the [ ] button to rewind. By pressing the PHRASE TRAINER button, you can hold the sound that was being played at the moment you pressed the button (the Hold function). This is convenient when you need to hear individual notes in a phrase. Pressing the [ ] button while playback is paused will return you to the beginning of the recorded phrase. In this mode you can transpose the key (pitch) of the sound from a CD or MD connected to the AUX jack. The AUX Pitch icon will light when you are in this mode. Each time you press the AUX PITCH button, you will alternate between Key Transpose Only and Key Transpose + Bass Cancel. Start the CD or other audio source, and press the ENTER/REC button at the beginning of the desired phrase. [. . . ] 0 [Hz]) Specify the level at which the speed is switched. FILTUP2 Low-pass filter auto-wah with positive polarity and a strong peak. The Intelligent Pitch Shifter creates musically useful harmonies by varying the amount of pitch shift according to the note you play and the key in which you are playing. For example if you select a pitch shift of a 3rd upward in a major key (MAJ3UP), the amount of pitch shift will vary automatically between three semitones (a minor third) and four semitones (a major third). [. . . ]