User manual KORG PXR4

[. . . ] E 1 To ensure long, trouble-free operation, please read this manual carefully. Precautions Location Using the unit in the following locations can result in a malfunction. · In direct sunlight · Locations of extreme temperature or humidity · Excessively dusty or dirty locations · Locations of excessive vibration THE FCC REGULATION WARNING (for U. S. A. ) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] A song that is created in this way can be played back on the PXR4, but there are several limitations on how it can be edited. 1. Recording onto a master tape 1 Check the completed song. of each track, and play back to check the song. 2 Connect your external recording device. Connect the [LINE OUT] jack of the PXR4 to your tape recorder or MD recorder, etc. Start recording on your external recording device, and play back the PXR4. Limitations for a stereo MP2 song · Basic operations that are not possible Recording (including additions or bounce) Track editing Adding, changing, or editing effects · Locate mode The "Free Time" display will indicate the time available for stereo recording at the recording grade of the original song of this stereo file. · System mode In the "Card Utl" page, only Card Info, Recovery, and Format can be used. The contents of the "System" page cannot be edited. · Mixer mode Editing can be performed as usual, but saving is not possible. · Mark mode Marks cannot be registered or added. Marks registered in the original song will be ignored. 2. Using the sub input If you want to play along with the playback of the four tracks, you can use the external input as a sub input that is added directly to the master button. 1 Connect your external input device to the input jack. Press the [SYSTEM] key, and use the [CURSOR] up/ down keys to display the "System" page. Then press the [CURSOR] right key to display the "MixerSys" page. Now press the [CURSOR] right key to display 51 Operation Creating a stereo file Here's how the audio recorded on tracks 1­4 can be converted into a stereo file. Hold down the [SHIFT] key and press the [LOCATE] key to switch the "BOUNCE" display to "CONV" (convert). Step 12. Saving to your computer When a recording or editing operation is completed, the PXR4 automatically writes the data into the card. Song data saved on the card can be sent to your computer and saved (backed up). When there is little space remaining on the card, or when you have completed a song, you should save your data on a medium other than the card. A card for use with the PXR4 must not be formatted on a computer or digital camera etc. The card must be formatted by the PXR4 itself. 2 Select the tracks that will be recorded. Press the [REC SELECT] key for track 1 and 2 to assign a " " symbol to tracks 1 and 2. [. . . ] 43, 58 Copy Track . . . . . . . . . . . . . . . . . . . . . . . . . . 49, 61 Delete Track. . . . . . . . . . . . . . . . . . . . . . . . . 49, 61 Erase Track . . . . . . . . . . . . . . . . . . . . . . . . . . 47, 60 Insert Track. . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]