User manual KORG SP170S

[. . . ] DIGITAL PIANO Thank you for purchasing the Korg SP-170S digtal piano. This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be used in the country in which you reside. WARNING: Use of this product in any country other than that for which it is intended could be dangerous and could invalidate the manufacturer’s or distributor’s warranty. [. . . ] (Figure 3) While you press the pedal, the sound will sustain, creating a rich, lingering sound. Alternatively, you can use an optional DS-1H damper pedal. a half-pedal damper effect can be applied to Piano 1 or 2. Connecting audio components Figure 4 You can use the PHONES jacks as line-out jacks to connect powered speakers or audio components to the keyboard. For such connections, use commercially-available cables that are appropriate for the components that you’re using. Before connecting audio components, make sure that you turn off the power to the unit and the audio components. Otherwise, damage to the unit or other components may occur. Using the music stand • Insert the legs of the supplied music stand into the dedicated groove that’s located in the middle of the top panel. (Figure 4) 1 Playing Different Sounds The SP-170S features 10 preset sounds. Pressing the SOUND button repeatedly will change the sound in the following sequence. Organ → Strings After Strings, the sound will return to Piano 1. Pressing the PIANO PLAY button will switch any sound to Piano 1. Whenever you turn on the unit, the default preset sound (Piano 1) will be recalled. Organ: Strings: You can also change the sound by pressing one of the keys ranging from C7 to A7 while simultaneously pressing and holding down the PIANO PLAY and SOUND buttons. (Please refer to “Key Functions” on pages 2 and 3. ) Using Other Functions The SP-170S allows you to play back the songs or adjust various functions by pressing a specific key while also pressing and holding down the PIANO PLAY and SOUND buttons. Please refer to the “MIDI” section on the next page for more information on MIDI channels and program change messages. While pressing and holding down the PIANO PLAY and SOUND buttons, do not play the keyboard. Otherwise, you might get an unexpected result. For information on the functions that are assigned to the keys, please refer to “Key Functions” on pages 2 and 3. About the confirmation sound When you press a key to adjust settings for a function, you will hear the confirmation sound. To turn this sound off, simultaneously press and hold down the PIANO PLAY and SOUND buttons and press the A# 0 key. [. . . ] The default setting (when you turn on the unit) is “No Transposition. € You can apply effects to each preset sound. € Simultaneously press and hold down the PIANO PLAY and SOUND buttons, and then press the B5 key to turn on the chorus effect. To turn off the chorus effect, repeat the previous procedure but press the A# 5 key instead of B5. [. . . ]